Models
>
RB21KA-4A
RB21KA-4A (BG71C) Magic Chef Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RB21KA-4A
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
$11.72
This is a genuine OEM replacement part. This is a door shelf trim retainer designed for use with refrigerators. The purpose of the retainer is to hold the door shelf in place on the door. This replace...
In Stock
This is an OEM part sourced directly from the manufacturer. This gasket is designed for used on the fresh food door on your refrigerator. When the door is closed this gasket creates a seal, this preve...
In Stock
$11.14
This is a genuine OEM replacement part. This egg tray is designed for use with refrigerators. This tray fits inside a compartment on the door of your refrigerator, and it holds up to fourteen eggs. T...
In Stock
This is an OEM part sourced directly from the manufacturer. This retainer bar is designed for use with your refrigerator. It is cut-to-fit the door shelf on the inside of your appliance. It is simple ...
In Stock
$38.59
This is a genuine OEM replacement part. This door spacer washer is commonly used on refrigerators and ranges. It is most often part of the lower hinge assembly, usually being placed on the pin that fi...
Special Order
This is the cover to the bottom hinge on your appliance. Sold individually.
No Longer Available
Sold Individually. This screw holds the handle in place on the freezer door.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RB21KA-4A
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Mobile, AL
- Parts Used:
- WP70048-3
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver
Gasket wouldn't seal all the way around
Due to some deformity of the gasket, it didn't seal all the way around. The instructions suggested using a heat light to warm the gasket with the door open. That didn't work too well so I closed the door and used a heat gun lightly in the areas it didn't seal. That worked great to soften the gasket so the magnet in the gasket could pull
... Read more
it gasket tight to the refrigerator. I let it cool with the door closed and it now seals perfectly.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Malden, MA
- Parts Used:
- WP70048-3
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
Needed To Replace Gasket/Seal On Fridge
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dustin from Lake Zurich, IL
- Parts Used:
- WP70048-3
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Wrench (Adjustable)
Long time!
Well the repair was not bad the package came in real fast thank you very much. Doing the work was real hard took about an hour to do and then putting it on I do not think it stayed on good still using some duck tape to hold it and the top and bottom are real fat and will not sink on in. I do not know what to do or what I did wrong. I am k
... Read more
ind of afraid to take it off because it might rip. Some of it ripped as I was putting it on too. Do you have any ideas of what I can do or what might be my problem? Thanks.
Sincerley,
Dustin Takla
Sincerley,
Dustin Takla
Read less
Was this instruction helpful to you?
Thank you for voting!