Models > GC-J258GSXL

GC-J258GSXL (ASTCNA0) LG Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GC-J258GSXL

Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
Proper movement of the center door flap helps a French door refrigerator seal the gap between its doors. This mullion spring applies tension to the hinged flap, guiding it during door opening and clos...
In Stock
Order now and your part arrives by Nov 21
This part includes a single mounting bolt needed to secure the door handle to your refrigerator. This part is commonly replaced because the handle has started to loosen. Try tightening the screw first...
In Stock
Order now and your part arrives by Nov 21
This deli drawer is for refrigerators. Deli drawer holds meats, vegetables and snacks in the fresh food compartment of the refrigerator. Follow the instructions in the owner's manual when installing this part.
No Longer Available
To control the water supplied to the dispenser and automatic ice maker, this refrigerator water inlet valve assembly opens when the appliance requests water and closes when dispensing or filling ends....
Special Order
Automatic ice production is easy with this refrigerator ice maker assembly kit. Water enters from the inlet valve and freezes in the mold. Once ready, the cubes are released into the storage bin. Inst...
In Stock
Order now and your part arrives by Nov 21
$28.55
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
In Stock
Order now and your part arrives by Nov 21
This is a single water filter that can be accessible inside the refrigerator. Water filters are designed to provide cleaner and betting tasting water, while also protecting refrigerators and ice machi...
In Stock
Order now and your part arrives by Nov 21
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
In Stock
Order now and your part arrives by Nov 21
In Stock
Order now and your part arrives by Nov 21
Water cools inside the refrigerator before dispensing with help from this reservoir tank assembly. The tank holds a supply of water in the fresh food section, allowing it to chill between uses. Replac...
In Stock
Order now and your part arrives by Nov 21
This door stop closer helps the refrigerator door close smoothly. Mounted near the lower hinge, it guides the door through its closing motion and limits how far it can swing open. Installing a replace...
In Stock
Order now and your part arrives by Nov 21
This roller assembly supports smooth movement of racks, drawers, or drums during operation. Reduced friction improves ease of use and reduces wear. Replacing a worn roller restores quiet, smooth movement.
In Stock
Order now and your part arrives by Nov 21

Common Problems and Symptoms for GC-J258GSXL

Viewing 8 of 8
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing Fixing
How to fix it
Not dispensing water
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from JACKSONVILLE, FL
Parts Used:
AJU72992601
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
replace leaking water inlet valve assembly
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
42 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pauline from CUTLER BAY, FL
Parts Used:
AHT73554102
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Broken glass shelf
I was unable to replace the shelf (no assembly required) because I was sent the incorrect part even though I gave the model #,
serial # and exact description and measurement to the agent to whom I spoke. Even worse, I was told that I was responsible for returning the part at my expense. Rather than risking getting another incorrec t part I will have a replacement plexiglass made to fit my shelf.
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Charles R from FAIRFAX, VA
Parts Used:
MHY62044106
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Spring on door closer broke
Found the broken spring; matched it with parts diagram. Googled for sources via part number. Selected this site because it had best deal - price, availability, shipping. Part arrived as predicted; installed it in 2 minutes. Job done. Door now works.
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!