Models > 77249

77249 LG Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
If the light inside your fridge is not coming on, or if it is staying on continuously, there may be an issue with your door switch. When the door to your fridge is closed, the button on the switch is...
In Stock
Order now and your part arrives by Mar 19
This guide rail, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer section of your refrigerator. This slide rail supports the storage basket in your freezer, allowin...
No Longer Available
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light co...
Special Order
"Clips"
Special Order
If your freezer drawer isn’t sliding like it used to, this left-side drawer slide might be the fix. It’s made of white plastic, about 15 inches long, and built to support the drawer so it moves smooth...
Special Order
Replacing a worn shaft cam restores smooth door movement, reduces strain on the hinge assembly, and improves sealing efficiency to keep temperatures stable and energy consumption low.
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
This camshaft helps control smooth opening and closing of freezer drawers. Wear can cause jamming or uneven movement. Replacement restores proper alignment and ease of use.
In Stock
Order now and your part arrives by Mar 19
This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power sourc...
No Longer Available
In Stock
Order now and your part arrives by Mar 19
No Longer Available
This part is a temperature sensing devise. It senses the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted. It is calibrated to permit...
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 77249

Viewing 4 of 4
Light not working
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Debbie from Waltham, MA
Parts Used:
6600JB1010A
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Remove and replace light switch
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
44 of 85 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Warren from Moodus, CT
Parts Used:
4430JJ2005B, 4430JJ2005A
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Both cams had broken off the gasket retainer strips
Check YouTube, but no one shows all the details. Need to swap hinges and spring from old retainer to new retainers by removing screw at bottom of hinge, then removing rod with small screwdriver to poke the rod out. I laid the old and new side by side and did swap to ensure proper orientation. Attach cams before sliding gasket retainer bac k into gasket, I used a few drops of liquid soap as lubricant on the retainer to help it slide in. Very important to ensure the edge of the retainer is tucked behind the door edge or else things will not fit correctly. I did it a few times before I got it right, but didn’t break anything else. Good luck.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
HARRY from SILVER SPRING, MD
Parts Used:
4975JJ2028D, 4975JJ2028C
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
plastic on rail guides broke
removed three screws from each guide and removed. Replaced with new guides using the same screws.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!