Models > 71313

71313 (ASTCSE3) LG Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 71313

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
Refresh your fridge with this clear pantry drawer cover, designed to seal the front of the drawer and keep your food fresh and protected. It adds a clean, finished look to your refrigerator while help...
In Stock
Order now and your part arrives by Mar 22
Keep your refrigerator organized with this replacement door bin, featuring a combination of white and clear plastic for a clean, modern look. It attaches to the inside of the fridge door and is ideal ...
In Stock
Order now and your part arrives by Mar 22
This refrigerator door gasket is a durable, flexible rubber seal designed to create a tight closure around the door, helping maintain proper temperatures and overall cooling efficiency. It replaces wo...
Special Order
No Longer Available
Special Order
Special Order
The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.
In Stock
Order now and your part arrives by Mar 22
Special Order
In Stock
Order now and your part arrives by Mar 22
In Stock
Order now and your part arrives by Mar 22
In Stock
Order now and your part arrives by Mar 22
In Stock
Order now and your part arrives by Mar 22

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 71313

Viewing 3 of 3
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Door Sweating
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stanley from Armona, CA
Parts Used:
ADX73350633
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Original gasket became deformed creating bad seal.
Soak new gasket in hot water in bathtub to soften while removing old gasket. No tools required, it was a little difficult pulling old gasket out but once you get it started part way out it will come out real easy. By the time you get the old gasket out the new gasket will be warm and easy to get started into the groove it pops into. Start ing on back (hinged) side is of door, begin pushing new gasket into groove. Work up and down pushing gasket into place working towards the corners and around to the front side of door. Your all done. This is a job I went into a little nervous thinking I might be calling a service man out to fix, but it turned out to be really easy.
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Garthlette from COVINGTON, GA
Parts Used:
6500JB2002X
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Error Code dH F
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in
one piece and sits on the bottom of the Defrost Element.
10 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
CONNIE from YORK, PA
Parts Used:
ADX73350633
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The gasket was torn and leaking cold air.
Pulled the old gasket out.l. Started at the top left corner of the gasket and pushed the Corning in tight and push the gasket in to the other corner down the right side th the corner, across to the left bottom corner and up the right side to the start of the beginning. Very easy installation.

Delivery was fast. Satisfied wit h part select.com. Spoke to a representative in customer service and she checked to make sure I was ordering the correct part. Very satisfied with your service.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!