Models > GM-L277UQRH > Instructions

GM-L277UQRH LG Refrigerator - Instructions

Jump to:

All Instructions for the GM-L277UQRH

Customer:: George from ATLANTA, GA
Parts Used:: 3390JA1150A
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The ice tray had warped and dumped water, which then froze down through the ice bucket and below.

To replace the warped tray, I found the service manual (pg. 124 below) which took some interpreting.
Removed the lever. Then removed the assembly by two screws that are forward to the unit and go upwards.
The insulation, sensor, and sensor cover are simply pulled down and off and the unit separated to removed the tray, and then insert the new tray. Proceed in reverse. Takes only a few minutes.

/Users/grf/Desktop/fridge ice tray.pdf

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from HILLSBORO, OR
Parts Used:: AEQ36756901
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Ice maker bail frozen. Chose to replace the entire assembly

Examined old ice maker. It is held by some Philips screws. There are many screws you don't need to unscrew so look carefully. Then disconnected th dual in line connector. There is a little push tab to squeeze to release. Then the ground is connected with a screw. It's a little hard to see but unscrew that. My replacement came with no instructions or screws so try not to drop the screws down in the netherlands of the fridge. The hardest part was maneuvering the icemaker to reattach the power and ground. Even with that pretty straight forward replacement.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Michael from Punta Gorda, FL
Parts Used:: AKC55858901
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Ice bucket had broke and did not dispence ice

Took the broken ice bucket out and replaced with the new one

Was this instruction helpful to you?

Customer:: David from Lewisville, TX
Parts Used:: AAP34518101
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Manufacturer Cahnged Part Desin

Not the fault of partselect. The manufacturer had decided to modify my part and still specifying that it was the NEW part number and that it was the direct replacement (shame on LG). Well its not the same part. The partselect CSR worked with me to try and find the previous design to no avail, even going so far as to give me the phone number of an obsolete parts seller... wow! Without a whimper parts select credited my account for the part that would not fit!! Without a doubt I will use them again. Way to stand behind your sale!! And also I got the parts within two days, amazing. The ones that did fit were well packed in perfect condition and on time. DON'T HESITATE TO USE THIS COMPANY

Was this instruction helpful to you?

Customer:: William from Bridge City, TX
Parts Used:: AEQ36756901
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins

icemaker quit working

My husband took out the ice maker. We ordered the part. He looked on YouTube for instructions. Including looking up instructions, I think it took him way less than an hour.

Was this instruction helpful to you?

Customer:: William from Nolensville, TN
Parts Used:: 3390JA1150A
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Ice tray was bent and spilling water onto ice making it freeze

I took the ice out with one screw and took out the old tray the new one slipped right in and I hooked up the little heat strip with one snap works perfect cost $10 I was told by appliance repair tech that I needed to replace the ice maker for $450 saved $440 dollars replacing the bent or warped ice tray

Was this instruction helpful to you?

All Instructions for the GM-L277UQRH