Models > 71014

71014 LG Refrigerator

Jump to:

Find Part by Name

Most Popular Parts for 71014

Lamp Cover

This lamp cover is also commonly referred to as a light lens. This is a genuine replacement part. It is used in a refrigerator to cover the light bulb. It is made of clear plastic. It measures 14 inch...

Evaporator Fan Motor

★★★★★

(1)

$107.95

This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...

Order now and your part arrives by Mar 19

Refrigerator Lamp Case

$44.24

Order now and your part arrives by Mar 19

Gasket Assembly, Door

Refrigerator Push Button Switch

$33.94

SOCKET, LAMP

This part is a replacement light socket for your refrigerator. This model is white in color, and it has two sockets that will fit two separate light bulbs. The light socket connects to the power sourc...

Light Bulb

Gasket Assembly, Door

Door Gasket - Black

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Door Gasket - Black

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Fan Assembly

$23.05

Order now and your part arrives by Mar 19

Defrost Sensor Assembly

$44.24

Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 71014

Viewing 4 of 4

Light not working

Fixed by these parts

Door won’t open or close

Fixed by these parts

Videos for 71014

Viewing 2 of 2

Replacing the Evaporator Fan Motor

Replacing the Thermistor Assembly

Installation Instructions for 71014 Provided by Fix customers like you

Viewing 3 of 8

Customer:: Rick from CLEVELAND, TN
Parts Used:: 5901JA1021A, 4681JB1027C
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Very bad noise which stopped when the door was opened

The Refrigerator now runs very quite.
After watching several videos I started on mine and found that it was a bit different than any in the videos. However all but the back panel was shown and that was helpful.
The back panel was a bit difficult but a hair dryer seemed to help .
All in all it was a good choice to do it myse ... Read more

Read less

14 of 19 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Brad from MUSCATINE, IA
Parts Used:: 3550JJ1070B, 3110JJ1014A
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Warped and melted lamp cover

Remove 2 screws and then disconnect wires to the bulb sockets. Reconnect the wires Reinstalled lamp case , tab end first then replaced the 2 screws and the Lens cover. In addition, I changed out the incandescent bulbs to a much cooler LED bulb.

5 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: George from WHITE BIRD, ID
Parts Used:: 4681JB1027C
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Blower motor out on condenser

followed detailed movie from Utube video

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?