Your refrigerator air filter should be replaced at least every 6 months to ensure its working as it should. This part is responsible for reducing common food odors and bacteria in the air, improving u...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
This authentic OEM part is a mounting screw for the door handle on your refrigerator. If the door handle is loose or you are having issues opening or closing the door, a new mounting screw may solve t...
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
May 4, 2022
I’m looking for a motherboard for my KitchenAid refrigerator.
For model number KRMF706ESS01
Thank you for your question. The part number listed under your model number for the main electronic control board is FIX11737802. There is another electronic control board listed for your refrigerator. The part number listed for it is FIX11757074. If you need help placing an order for these parts, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
My refrigerator freezer is thawing food, so not cold enough and is making a noise. What could this be?
For model number KRMF706ESS01
Hello Justin, thank you for contacting us. First of all, inspect the compressor and if it is not running the issue is probably related to a faulty inverter, part number FIX12070625. It supplies voltage to the compressor. Please check the evaporator fan motor, part number FIX12070640, and make sure that the evaporator fan is running. It circulates air through the fresh food compartment for efficient cooling. Also, investigate the air damper control, part number FIX11751058, and ensure that it is working. It controls the cold airflow from the freezer compartment into the refrigerator compartment. We would also recommend checking the thermistor, part number FIX2580944. Investigate the evaporator coils and make sure there is no built-up ice on the coils. If you notice ice build-up, we would recommend defrosting it and checking the heater, part number FIX11738607, for continuity. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.