Models > KBLA22KRSS00

KBLA22KRSS00 KitchenAid Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for KBLA22KRSS00

Viewing 7 of 7

Manuals & Guides for KBLA22KRSS00

Click to download
Keep searches simple, eg. "belt" or "pump".
A cracked center crisper rail can leave the crisper shelf unsupported. This OEM refrigerator rail sits between the crisper drawers and supports their inside edges as they slide in and out. No tools ar...
In Stock
Order now and your part arrives by Nov 23
To hold the shelf frame above the crisper drawers securely in place, this refrigerator crisper drawer cover support clip attaches to the shelf rail or bracket to help keep the cover level and stable u...
In Stock
Order now and your part arrives by Nov 23
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 23
A three-terminal rocker arm switch controls a refrigerator light and fan circuit. It is an OEM replacement switch for that circuit.
In Stock
Order now and your part arrives by Nov 23
This refrigerator crisper shelf frame supports the glass shelf and keeps produce drawers aligned. Its molded plastic border holds the glass insert above the drawers and provides structure for smooth s...
In Stock
Order now and your part arrives by Nov 23
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start ...
In Stock
Order now and your part arrives by Nov 23
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
No Longer Available
This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...
In Stock
Order now and your part arrives by Nov 23
The white, four-blade OEM evaporator fan blade moves cold air over your refrigerators evaporator coils. A noisy fan or a warm refrigerator can indicate a problem with the blade. Check your refrigerato...
In Stock
Order now and your part arrives by Nov 23
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
In Stock
Order now and your part arrives by Nov 23
$48.21
Long harness thermistor kit.
In Stock
Order now and your part arrives by Nov 23
Only the glass insert is included. It fits into the crisper drawer cover frame, which is sold separately, and covers the refrigerators crisper drawers. Check your refrigerators model number to confirm this OEM part fits.
In Stock
Order now and your part arrives by Nov 23

Common Problems and Symptoms for KBLA22KRSS00

Viewing 19 of 19
Light not working
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Clicking sound
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer too cold
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door Sweating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Too warm
Fixed by these parts
Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not dispensing water
Fixed by these parts
Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ruth from Roxbury, MA
Parts Used:
WPW10671238
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Cracked & Snapped Center Crisper Rail
A very easy fix took all of five minutes
230 of 256 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cheryl K from Pinellas Park, FL
Parts Used:
WP67003426
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The refrigerator was not getting cold and the coils were not defrosting.
Start by removing the freezer door and inner baskets so you have some space. Next, take out the ice maker by removing the 3 screws that attach it to the side and unplug it from the harness. Then the cover for the thermistor and the fan vent should be popped off carefully leaving the back cover only. The back cover is held on by 4 screw s, one in each corner. Remove all 4 screws and carefully loosen the back cover by pulling the top forward and laying it level to pull it out. Behind the cover are the coils and other components. If the coils are covered with ice they should be defrosted by using a blow dryer. Once the ice is clear, the thermostat is located towards the top left clamped onto a copper pipe that circles up and around. Carefully pull it off the pipe and cut the wires making sure you leave enough to reattach the new ones with a butt connector. Strip about 1/4 inch of insulation off the wires and crimp both ends into the butt connector making sure they are tight. Heat shrink is highly recommended. Clamp the new thermostat to the copper pipe where the old one used to be and your almost done. Replace the back cover the opposite of the way it was pulled out by putting it in flat with the bottom part in front. Once it is all the way to where it needs to be, push the top upwards while sliding the bottom downwards, then push it in flat against the back. It can be bent slightly if needed. Put the screws back in that hold it on and replace the plastic covers. Then reinstall the ice maker being sure the hose for the water is correctly positioned so that the water goes into the ice maker. Turn it back on and put the baskets and door back on and you're done.
151 of 170 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gordon from Ben Wheeler, TX
Parts Used:
W10613606, WP67003426, 12002355
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Freezer cold, refrigerator warm
Overload relay accessible from back, by compressor unit. Very easy to change out. Diagram from your site placed defrost thermostat in same area.It wasn't. Found another diagram, showed it in refrigerator light area, took that apart, not there. Yet another diagram showed it in the duct work area at back of refrigerator cabinet. Not there. Finally removed back of freezer compartment, found thermistor and thermostat with the fins. Clipped wires, wired in parts, quick fix. Longest amount of time was spent finding the old parts to replace them. Actual replacement took less than 15 minutes. Refrigerator holding at 35 degrees set on 2 now, better than ever. Total cost, less than $120, doing iy ourselves....priceless.
180 of 285 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!