Models > 2537034941D > Instructions

2537034941D Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 2537034941D
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
melvin from BASKING RIDGE, NJ
Parts Used:
EAFCBF
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
you r label (this end in arrow is wrong
placed filter in sideways
15 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from POTTSTOWN, PA
Parts Used:
EAFCBF
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
NO PROBLEM JUST DECIDED IT WAS TIME TO CHANGE FILTER
VERY EASY SLIDE OLD ONE OUT AND PUT NEW ONE IT
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Chuck from GRIFTON, NC
Parts Used:
242220204
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Water outlet tubing leaking in elbow behind water filter
Most difficult and time-consuming part of the job was clearing the refrigerator of food and shelving. Replaced tubing as it had split in the factory bend of the tubing directly behind the water filter. Take your time and don't get in a hurry.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
fred from Austin, TX
Parts Used:
EAFCBF
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
routine maintenance
slide old filter out and insert new one
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nesbit from GOLDEN MEADOW, LA
Parts Used:
242196204
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
light doesn't work
i only ordered 1, so i replaced each 1 then moved to the next. still no light, so it must be someting else. will try to check the wires with a volt meter to see if i have power next. something wierd happen, when i accidently touch the back of the led board, it lit up, small but still light up. hoping that means the led board is goo, must be in the wiring. i saw it had a main led board so will check the power to that.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 2537034941D
1 - 6 of 6