Models > 2539628010

2539628010 Kenmore Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$27.28
This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM...
In Stock
Order now and your part arrives by May 14
This is a genuine OEM door gasket, which works with refrigerators.
In Stock
Order now and your part arrives by May 14
Sold individually.
In Stock
Order now and your part arrives by May 14
Sold individually. NOTE: For 18 cubic feet refrigerator model order part # 240358005 for the shelf and part# 3201150 end caps, quantity 4.
In Stock
Order now and your part arrives by May 14
Also known as the Pan Cover Insert.
No Longer Available
This white end cap is designed for the right side of your refrigerator door shelf retainer bar.
No Longer Available
This white hinge pin bearing pivots the freezer and refrigerator door.
No Longer Available
$155.22
Pan only. The front, or the handle part, is sold separately.
Special Order
This part turns the light on/off as the door opens and closes.
In Stock
Order now and your part arrives by May 14
In Stock
Order now and your part arrives by May 14
Refrigerant system filter/dryer.
In Stock
Order now and your part arrives by May 14

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 2539628010

Viewing 9 of 9
Door Sweating
Fixed by these parts
Fixing
How to fix it
Light not working
Fixed by these parts
Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing
How to fix it
Won’t start
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cynthia from Girard, OH
Parts Used:
5303281398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
While cleaning the glass shelf above the crisper drawer, the shelf disintingrated in my hands!! Shattered into a million pieces!
I wrote down the Brand and model# of my refrigerator. googled it and PartSelect came up. I mean it literally took me 5 minutes to select the part, and order it! I ordered it on a Saturday and the part arrived on Tuesday! And it was a perfect fit! I will always return to PartSelect for any replacement parts for my appliances! Thank yo u!
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Gurnee, IL
Parts Used:
216594300
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The compressor would not run.
I removed the cover, used a multimeter to test the compressor circuit, and found the compressor start relay to be defective.
Ordered a new one and installed it when it arrived.
18 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George from Odessa, FL
Parts Used:
5303207345
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
Door would not stay closed
Door would not stay closed so I decided to replace the gasket... The new gasket install was easy and quick. I removed the liner and took off the old gasket, placed the new gasket on the liner and reinstalled the liner. However that did not fix the original issue of the door not closing. I followed all the instructions listed on the web si te but none corrected the problem. The door on this model has no adjustment. So I adjusted the leveling wheels to tilt off center towards the back. That helped but still did not resolve the problem... I then closed the door slowly to see if it was being interfered with, As it turns out it was being hit by the bottom of the inside of the refrigerator. Since I could not adjust the door, I used the front leveling wheels to compensate for the lack of door adjustment. I slowly kept adjusting the w heels to see what effect it had. I finally adjusted them to the point were the door now closes and seals on its own. I’m guessing that over time the liner became malformed and caused the door to hit the inside of the refrigerator. After it started working I checked the level side to side and front to back. Side to side is good and there is a slight tilt to the rear.
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!