Models > 2538684082

2538684082 Kenmore Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Door Handle – Part Number: 3016493
No Longer Available
Ice Container – Part Number: 5303212918
$80.13
Special Order
Icemaker Water Inlet Valve Adapter – Part Number: 5308000205
No Longer Available
Plastic Water Line Nut - 1/4 inch – Part Number: 218731600
$54.12
Special Order
SCREW – Part Number: 5308000039
$20.72
In Stock
Order now and your part arrives by May 16
Water Inlet Tube – Part Number: 215456100
$79.19
In Stock
Order now and your part arrives by May 16
WHEAT – Part Number: 3016494
$41.78
Special Order
SHIM – Part Number: 183861
No Longer Available
COVER-EVAPORATOR COIL – Part Number: 163290
No Longer Available
SCREW-COV-MTG (NON-ILLUSTRATED) – Part Number: 187363
No Longer Available
FERRULE-OUTER – Part Number: 174734
No Longer Available
BEARING HINGE (4) (NON-ILLUSTRATED) – Part Number: 183138
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Launa from Nashville, TN
Parts Used:
3016493
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
original handle broke off due to years of use
removed two screws, replaced the handle, inserted original two screws and tightened.

I guess that's pretty good for an old woman (age 72).
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patrick from Midlothian, VA
Parts Used:
5308000205
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Adaptor leaking due to old rubber washer
Turned off water. Took cardboard backing off lower back of unit. Unscrewed the old adaptor from the water distributor. Unscrewed the water hose connection from the adaptor. Put plumbers tape on new adaptor. Re-connected water hose to new adaptor and re-attached the adaptor to the water distributor. Turned water on, checked for leaks , and tightened adaptor to water distributor until leak stopped (approximately a quarter turn) after hand tightening. Easy, hardest part was pulling out the unit and putting it back in place!
Read less
Was this instruction helpful to you?
Thank you for voting!
View More