106708764 Kenmore Refrigerator - Parts

The defrost timer works on a predetermined schedule, to alternate between the cooling cycle and the defrost heater in your freezer. When the heating circuit is activated, it melts any ice that has for...

This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. NOT...

This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...

Metallic screw that is less than an inch long. Does not include the plastic washer.

This part controls the light.

Sold individually.

The bulb is sold separately.

This clip is sold individually.

Support wheel assembly with bracket. Kit of 2.

This kit is enough for one right and one left support. There are 2 different styles of supports in this kit.