Models > EC112G > Instructions

EC112G Haier Refrigerator - Instructions

Jump to:

All Instructions for the EC112G
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Gerald from JACKSONVILLE, AR
Parts Used:
RF-7350-101
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
The old thermostat would freeze everything even at the lowest setting.
It was a simple matter of removal and replacement. The process was intuitive and very easy to do. Removal the old thermostat, extend the sensing tube and secure the tube to the bottom of the freezer compartment. Plug it back in, turn it on to the middle setting and see what happens. It worked and it was much cheaper than replacing the otherwise good mini-fridge. Take a picture before you take anything apart, use your picture to guide the replacement.
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from West Newbury, MA
Parts Used:
RF-0668-04
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Code LL in display, compressor runs constantly, ice
Control board is in plastic box at back of unit. Unplug old, plug in new, reinstall. Melt away ice inside and outside cabinet.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
carl from PHILADELPHIA, PA
Parts Used:
RF-7350-101
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
defective thermostate
open frig cabinet - disconnect old part - replace with new part -very straight foreword
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the EC112G
1 - 3 of 3