Models
>
MTG18GABPRWW
MTG18GABPRWW General Electric Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MTG18GABPRWW
Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$49.29
This part is a replacement door shelf retainer bar for your refrigerator. The shelf retainer bar connects to the end cap on either side, and the end caps connect it to the refrigerator door. The retai...
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
In Stock
Order now and your part arrives by Mar 30
Special Order
In Stock
Order now and your part arrives by Mar 30
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
No Longer Available
Special Order
In Stock
Order now and your part arrives by Mar 30
$61.55
The filter dryer filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Order now and your part arrives by Mar 30
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Heather from YAKIMA, WA
- Parts Used:
- WR71X10080
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The old retainer bar was dented outward and did not keep condiments in place
I detached the end caps from the fridge and the old bar. They are plastic pieces which do not have any screws, just a little plastic lever that is easily removable with a screwdriver. I then fitted the end caps to the new retainer bar and attached to the fridge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rita from Owensboro, KY
- Parts Used:
- WR71X10080
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Retainer Bar bend
Removed the bent bar and the end clips. Attached the end clips to the new retainer bar and snapped into place on the refigerator door. Very easy.
Was this instruction helpful to you?
Thank you for voting!