Models
>
GTS17GSNJRSS
GTS17GSNJRSS General Electric Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$81.95
The evaporator fan motor circulates air over the cooling coils from inside the freezer compartment. If your refrigerator is running warmer than usual, this motor may need replacement. The OEM motor is...
In Stock
Order now and your part arrives by Nov 21
$16.95
Measuring approximately 1 inch in diameter and helps reduce vibration transferred from the running motor, this red evaporator fan grommet cushions the fan motor at its contact with the mounting bracke...
In Stock
Order now and your part arrives by Nov 21
$37.49
This is a genuine replacement glass shelf for your refrigerator. It measures 21 by 13 inches and sits above the two crisper drawers. If the shelf has become cracked or damaged it should be replaced so...
In Stock
Order now and your part arrives by Nov 21
This genuine OEM light switch is used to control the light in your refrigerator. When the fridge door is closed, it depresses the switch and turns the light off. When the fridge door opens, it release...
In Stock
Order now and your part arrives by Nov 21
$15.26
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor fr...
In Stock
Order now and your part arrives by Nov 21
$28.95
The door shelf rail snaps into place on the door to hold items on the door shelf.
In Stock
Order now and your part arrives by Nov 21
$49.29
This snack pan rail is a manufacturer-made component designed to help your refrigerator’s snack drawer slide in and out smoothly. Made entirely of durable plastic, it measures approximately 16.5 inche...
In Stock
Order now and your part arrives by Nov 21
$15.26
To reduce friction at the door pivot, this refrigerator nylon hinge washer fits over the hinge pin to provide a smooth contact surface and maintain proper spacing between hinge components. Possible si...
In Stock
Order now and your part arrives by Nov 21
$56.24
This crisper drawer is for refrigerators. Crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer. Follow the instructions in the owner's manual when installing this part.
In Stock
Order now and your part arrives by Nov 21
In Stock
Order now and your part arrives by Nov 21
$15.26
This replacement screw secures refrigerator components. Its threaded shaft holds parts firmly at their mounting points, helping maintain alignment and reduce movement during everyday use. Replace the ...
In Stock
Order now and your part arrives by Nov 21
$15.26
A hex-drive, cupped-tip set screw secures a refrigerator or ice machine door handle to the door. Check the appliance model to confirm it fits; the listed 9.5 mm size does not specify which measurement it refers to.
In Stock
Order now and your part arrives by Nov 21
Common Problems and Symptoms for GTS17GSNJRSS
Viewing 12 of 12Noisy
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Light not working
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Clicking sound
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Too warm
Fixed by these parts
How to fix it
Fridge runs too long
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Won’t start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Luis from College Station, TX
- Parts Used:
- WR60X31522
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Freezer Fan
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and
... Read more
I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- alex from rohnert park, CA
- Parts Used:
- WR60X46086, WR60X31522, WR02X12008
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set, Wrench (Adjustable)
evaporator fan making lots of noise
the repair was really easy!!! took longer to put the little clip on the fan part than it was to install the whole moter and put everthing back together
save money do it yourself.....
save money do it yourself.....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lorinda from Dallas, TX
- Parts Used:
- WR23X31507
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
dropped something on the light switch and it broke off
we just pried out the old switch and pulled it out the rest of the way with a pair of needle nose pliers. Pulled off the wires on the broken switch and reattached to the new one and just slid/clicked it back into the hole.
Was this instruction helpful to you?
Thank you for voting!