Models
>
GTE18GTNDRWW
GTE18GTNDRWW General Electric Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GTE18GTNDRWW
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
$13.21
The evaporator fan grommet is used to provide a cushion between the fan motor and the motor mounting bracket in your freezer. This genuine OEM part is about one inch in diameter and is red in color. I...
In Stock
Order within the next 36 mins and your part ships today!
$31.94
This is a genuine replacement glass shelf for your refrigerator. It measures 21 by 13 inches and sits above the two crisper drawers. If the shelf has become cracked or damaged it should be replaced so...
In Stock
Order within the next 36 mins and your part ships today!
$17.07
This evaporator fan blade is a genuine OEM replacement part for your fridge. The fan attaches to the evaporator motor and is used to circulate the cool air. If your fridge temperature is too warm, and...
In Stock
Order within the next 36 mins and your part ships today!
$10.97
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor fr...
In Stock
Order within the next 36 mins and your part ships today!
The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of ...
In Stock
Order within the next 36 mins and your part ships today!
$9.47
This is the replacement hinge washer for your refrigerator. The hinge washer is mounted on the top of the door hinge pin, and supports the refrigerator door, allowing it to open and close easily. The ...
In Stock
Order within the next 36 mins and your part ships today!
$16.42
The door shelf rail snaps into place on the door to hold items on the door shelf.
In Stock
Order within the next 36 mins and your part ships today!
In Stock
Order within the next 36 mins and your part ships today!
$92.18
This crisper drawer is for refrigerators. Crisper drawer stores fruits and vegetables at a humidity level that helps keep them fresh longer. Follow the instructions in the owner's manual when installing this part.
In Stock
Order within the next 36 mins and your part ships today!
In Stock
Order within the next 36 mins and your part ships today!
The freezer door gasket creates a seal around the door to prevent warm air from entering the freezer compartment.
In Stock
Order within the next 36 mins and your part ships today!
This genuine OEM light switch is used to control the light in your refrigerator. When the fridge door is closed, it depresses the switch and turns the light off. When the fridge door opens, it release...
In Stock
Order within the next 36 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
December 11, 2022
Freezer section isn't defrosting and had ice in the freezer on the backwall and to roof of the freezer
For model number GTE18GTNDRWW
Hello Bruce, thank you for contacting us. We would recommend checking the refrigerator defrost heater, part number FIX12744078, and making sure it is continuous. Also, check the door gasket, part number FIX12069093, and ensure that no warm air is leaking into the refrigerator. If this does not help, the issue is probably related to the electronic control board, part number FIX12744126. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for GTE18GTNDRWW
Viewing 7 of 7Noisy
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Clicking sound
Fixed by these parts
How to fix it
Light not working
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Karen from COON RAPIDS, MN
- Parts Used:
- WR32X21260
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I accidentally broke the shelf glass
I ordered the new glass and put in in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from SARASOTA, FL
- Parts Used:
- WR32X21260
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken shelf glass
It was a perfect fit at 13 1/8 x 22 3/4 inches.
The glass must be forced under the white plastic drawer housing. Otherwise it will appear to be too long at the back. A gentle nudge will seat it properly.
The glass must be forced under the white plastic drawer housing. Otherwise it will appear to be too long at the back. A gentle nudge will seat it properly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GLENN from PENSACOLA, FL
- Parts Used:
- WR14X27230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Condensation freezing on the ceiling of the freezer, indicating the gasket allowing warm air into the freezer.
Do not uninstall the old gasket until you have read all of these instructions. Upon receipt of the new gasket, compare the model number of the GE refrigerator to the paperwork included. Unpack the gasket by hand to ensure not to damage the new gasket. There is no specified top or bottom, left or right to the gasket but there is a front si
... Read more
de (to the freezer face) and a back side (attaches to freezer door). Hold the new gasket up to the installed old gasket to ensure the size is identical (close in size WILL NOT work). Once the size is verified, pull the old gasket from the door, starting at any corner. The front side of the gasket is broader than the back side which presses into the door slot. Make sure that the door slot is clean to ensure a perfect fit. Recommend the new install begin at a top corner. Gently press the new gasket into the slot along the top. Do a side next, working the gasket in along the bottom to the last corner. Ensure the freezer face is clean for the best seal. Make sure the new gasket is dry, a wet gasket may freeze and pull the new gasket out! A good seal is verified by the "suction" when trying to open the door. A good seal is also indicated by no moisture/condensation the following day.
Read less
Was this instruction helpful to you?
Thank you for voting!