Models
>
CVE28DP3NBD1
CVE28DP3NBD1 General Electric Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CVE28DP3NBD1
Viewing 13 of 13
Keep searches simple, eg. "belt" or "pump".
$84.17
Designed to enhance water quality in select refrigerators, this NSF-certified water filter (Standards 42, 53, and 401) reduces lead, VOCs, and more than 50 other contaminants. It ensures your water ta...
In Stock
Order now and your part arrives by May 2
$15.26
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
$74.30
This tinted bin gives you a handy spot in your fridge door for storing butter, cheese, and other small items. It’s easy to grab what you need thanks to the front handle, and the tinted design helps ke...
In Stock
Order now and your part arrives by May 2
$133.72
This small cube ice maker is a genuine replacement component designed for select refrigerator models. It automates the ice production process by freezing water, ejecting ice cubes into the bin, and re...
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
In Stock
Order now and your part arrives by May 2
$51.43
This genuine GE replacement bin provides durable storage for beverages, snacks, and other items in the lower right section of your refrigerator door. Featuring a sleek tinted design, it offers easy ac...
In Stock
Order now and your part arrives by May 2
Common Problems and Symptoms for CVE28DP3NBD1
Viewing 4 of 4Ice maker not making ice
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Cesar from ROYAL PLM BCH, FL
- Parts Used:
- XWFE
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
change water filter
un twist old one and twist the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Suffolk, VA
- Parts Used:
- WR30X39345
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Was not making ice
Unpluged refrigerator, Removed 1 screw, removed cover, unplugged 2 wiring harnesses, removed second screw in icemaker lifted up icemaker, put new icemaker in pulled down to catch in hooks.installed screw in icemaker, Reconnect 2 wiring harnesses, put wiring harnesses into cutout installed cover, put screw into cover. Plugged refrigerator
... Read more
back in set up icemaker by morning the bucket was full of ice.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Generoso from Ocala, FL
- Parts Used:
- WR51X31995, WR55X29875
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
freezer temperature was warm, but freezer evaporator frozen
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the ... Read more thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
Read less
Was this instruction helpful to you?
Thank you for voting!