If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet w...
The water filter in your refrigerator should be replaced every six months in order to provide clean, fresh tasting water. The filter absorbs impurities in the water like heavy metals, pesticides, and ...
This clear plastic refrigerator door shelf bin is located on the inside of the door. It is used to hold and organize items, such as jars and cans. Over time the shelf may crack, break, scratch or disc...
This rear crisper support mounts on the inside of the refrigerator wall to support the rear crisper cover. It is made of white plastic and is sold as an individual part. The support is secured in plac...
This is an authentic air filter for refrigerators, sold individually. It helps to reduce strong odors and impurities found in the air. This filter needs to be replaced every 6 months to ensure it is w...
This is a genuine refrigerator door bin that holds items on the door of your appliance. This bin can be easily moved to accommodate for space. This bin is only available in clear plastic and replaces ...
This is a refrigerator water inlet valve and mounting bracket. It is responsible for releasing water from the supply line when triggered, which makes its way through to the water dispenser and/or icem...
This is a shelf frame for your refrigerator. It supports the glass that sits above your meat pan or chill drawer. This white plastic manufacturer-approved part does NOT include the glass pane that it ...
The crisper drawer, also known as a crisper pan, is a clear plastic drawer found in your refrigerator. They typically hold fruits or vegetables, and the drawer has a slide control that will allow you ...
This is a replacement crisper glass insert for your refrigerator. It fits into the crisper pan frame and acts as the top of the crisper pan, as well as a shelf for food storage. Because it is made of ...
This genuine OEM replacement part is the plastic cover or frame for the crisper drawer in your refrigerator. The crisper drawer sits underneath, held in place with the molded glide rails, and the glas...
If your fridge isn’t making ice or is leaking, this replacement ice maker can help. It includes everything needed to freeze and dispense ice automatically. It’s easy to install and works with many bra...
In Stock
Order now and your part arrives by May 4
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Louis
October 26, 2023
Ice maker will not dispense ice. Flapper in door does not open and auger motor doesn’t turn. I put it in diagnostic mode and auger motor and ice crusher solenoid both worked when manually activated on the control panel in diagnostic mode. Ice dispenser Flapper would not open when selected in diagnostic mode but would show as open or closed when I opened and closed with my hand. Water dispenser works normally. Is this a main board or control panel problem?. Control panel digital read out is dim and missing some segments of the numbers. Does not display actual temperature of freezer or fridge. Just the the temp setting.
For model number LGHX2636TF0
Hello Louis, thank you for your inquiry. All of the issues you list point to a faulty Control Board. The Control Assembly is PS12365165. Good luck with your repair.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle. A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if t
... Read morehe maker dumped the ice into the bin.
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
