This is an authentic air filter for refrigerators, sold individually. It helps to reduce strong odors and impurities found in the air. This filter needs to be replaced every 6 months to ensure it is w...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
If your fridge or freezer isn’t sealing properly or feels warmer than usual, this door gasket could be the fix. It’s designed to fit select models from Frigidaire, Kenmore, and Electrolux and helps ke...
The 115-volt evaporator fan motor is in the back of the freezer section and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated. If your freezer is...
This is an adjustable foot for your freezer, refrigerator, and dryer. This part supports your unit by screwing into one of the bottom four corners, and adjusting the height of your machine. If your ap...
This replacement deli drawer helps organize your refrigerator by providing a dedicated space for meats and cheeses. It’s built to fit select refrigerator models and slides out easily for quick access....
This door bin is for freezers.
Door bin stores items in the door of the freezer.
Follow the instructions in the owner's manual when installing this part.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
September 20, 2023
I think I have to replace the COOLER draw not the CRISPER draw in my Frigidaire Professional model FPRU19F8RFC
For model number FPRU19F8RFC
Hi Brian,
Glad to hear from you. The part number for the cool drawer is FIX10064644. If you have any questions, please let us know.
My ice tastes weird. Is there a filter for the ice maker in my freezer.
For model number FPRU19F8RFC
Hi Brian, thank you for your inquiry. Based on our research, the only filter listed for your model is the air filter, part number PS1993820. We would suggest you make sure the water supplied to the house is clean. The ice maker uses the same water as the faucet. Often, a fire hydrant that was flushed, or a broken water main, can cause dirty water. In these cases, you should run the water for a while at the faucet to clear out the lines and discard the ice until the water clears up. You can also clean the ice maker and bin with a tablespoon of baking soda and water. We hope this helps!
Turned freezer off at themostat and unplugged freezer. Removed 2 screws at front 2 at the back and 2 at the top. Lowered top cover and removed evaporator fan bracket (2 more screws) removed themostat capulary tube( 1 screw and bracket) then unplug fan motor. Removed motor from bracket (2 screws). Put on new fan motor then removed fan b
... Read morelade from old motor and put on the new motor. Remounted fan motor bracket and thermostat capulary tube. Remounted top cover, plugged freezer in the set the thermostat to 4 and freezer is working fine and doing its job. I orderedmotor on a Sunday and it was shipped on Monday and I received said part at 7:pm on Wednesday.
Removed evap cover from Commercial Refrigerator. Removed mounting screws from Evap motor mount. Replaced evap fan motor. Repositioned. Reinstalled evap cover. Tested . This motor was hard to find locally. Glad I called.
