Models
>
FFHB2750TE4
FFHB2750TE4 Frigidaire Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FFHB2750TE4
Viewing 7 of 7Keep searches simple, eg. "belt" or "pump".
Enjoy fresher-tasting water and ice with this refrigerator water filter. Its carbon filter material helps reduce chlorine taste and odor as water passes through to the dispenser and ice maker. This pa...
In Stock
Order now and your part arrives by Nov 23
$25.25
This metal shoulder screw is used to secure a refrigerator or freezer door handle to the outer door panel. It is a number 10 AB handle mounting screw and is supplied as one piece. A missing screw, dam...
In Stock
Order now and your part arrives by Nov 23
Designed for 36-inch French-door refrigerators, this GREY magnetic door gasket ensures a secure seal to prevent air leaks and maintain optimal cooling conditions. It plays a critical role in regulatin...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$80.56
This refrigerator kickplate grille attaches to the lower front of the appliance to provide clean airflow and a finished appearance. Made from durable plastic and commonly produced in a gray finish, it...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
The #2 Quadrex drive and #10AB thread identify this flat-head screw for mounting refrigerator components. It secures shelves, panels, and brackets as an OEM replacement.
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
Special Order
$63.45
Built to secure critical defrost components in place, this genuine OEM evaporator heater strap ensures proper positioning and heat distribution during the refrigerator’s defrost cycle. Its flexible al...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
Common Problems and Symptoms for FFHB2750TE4
Viewing 7 of 7Door Sweating
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ed from PETALUMA, CA
- Parts Used:
- 241778315
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Old door gasket was worn and edge was cut
Pulled the old gasket out if groove on the door, cleaned inside the groove, squirted some windex in the groove to ease the new gasket in the groove, then proceeded to work the gasket into the groove. Made sure gasket was all the way in the groove around the perimeter of the door. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barry from CHEVY CHASE, MD
- Parts Used:
- 241778315
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Original refrig door gasket was fraying
It's too easy to describe.
What's more important is that someone read this and see that you can save hundreds of dollars doing this repair yourself. I'm sure many handy people think that about everything they repair, but this repair is insanely easy and the $ savings ridiculous.
Wh ... Read more en I called the place I purchased the refrigerator from, they were more than happy to sell me the part with a 35% markup (your price was reasonable) and (when i asked) they told me that sending someone to my home to make the repair would cost about $400 ($200 per door) including the "home instal" fee.
I removed the old gaskets and put on the new ones (on both doors) in under 10 minutes. I confess that I did the job under the auspices of my very handy son but he'll agree with everything I just wrote. To the unhandy: go forth and replace your own gaskets.
What's more important is that someone read this and see that you can save hundreds of dollars doing this repair yourself. I'm sure many handy people think that about everything they repair, but this repair is insanely easy and the $ savings ridiculous.
Wh ... Read more en I called the place I purchased the refrigerator from, they were more than happy to sell me the part with a 35% markup (your price was reasonable) and (when i asked) they told me that sending someone to my home to make the repair would cost about $400 ($200 per door) including the "home instal" fee.
I removed the old gaskets and put on the new ones (on both doors) in under 10 minutes. I confess that I did the job under the auspices of my very handy son but he'll agree with everything I just wrote. To the unhandy: go forth and replace your own gaskets.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Claude from MARYVILLE, TN
- Parts Used:
- EPTWFU01
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Change filter
When removing existing filter you will experience some resistance at the 10-4 position which requires a little extra pressure to reach the 9-3 position.
Was this instruction helpful to you?
Thank you for voting!