Models > KRTD20V3GW1

KRTD20V3GW1 Frigidaire Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for KRTD20V3GW1

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
This white plastic door shelf retainer bar is used to keep bottles, jars, and condiments on the refrigerator shelf as the door is moved. It snaps into the inner door mounting points without tools and ...
In Stock
Order now and your part arrives by Nov 23
Bottles, jars, and condiments stay contained behind this white plastic refrigerator door shelf retainer bar. The rail attaches to the inner fresh food door and forms a barrier along the shelf edge, he...
In Stock
Order now and your part arrives by Nov 23
This clear plastic crisper pan is used to provide a separate storage space for fruits and vegetables in the refrigerator fresh food section. You can see the stored contents through the transparent sid...
In Stock
Order now and your part arrives by Nov 23
A clear food-storage surface above the crisper drawers is provided by this glass shelf insert. Measuring approximately 23.82 inches wide by 15.5 inches deep, it fits into the existing supporting frame...
In Stock
Order now and your part arrives by Nov 23
To help keep cold air inside and warm air carrying moisture out, this white refrigerator door gasket seals the fresh food section. Its flexible vinyl edge fits around the inner door panel and makes co...
In Stock
Order now and your part arrives by Nov 23
Four #10-16 screws secure a refrigerator or freezer door handle to the door. This OEM kit includes screws that are 0.500 in. long, with a Phillips or square drive. Confirm compatibility with your appliance before buying.
In Stock
Order now and your part arrives by Nov 23
During a refrigerator defrost cycle, this thermostat helps protect the evaporator from overheating. Cooling problems or a failure to defrost can point to an issue in the defrost system, but do not con...
In Stock
Order now and your part arrives by Nov 23
This clear plastic dairy door is used to cover the dedicated storage compartment on the inside of the refrigerator door. The hinged lid lifts to provide access to butter, cheese, and other stored item...
In Stock
Order now and your part arrives by Nov 23
$109.64
Meats, snacks, and other refrigerated foods stay organized in this clear plastic pantry drawer. The sliding pan provides contained storage in the fresh food section, while transparent sides make the c...
In Stock
Order now and your part arrives by Nov 23
This freezer wire shelf organizes frozen meals, containers, and bags. Its full-width design adds a raised storage surface, making items easier to separate and reach. The open wire spacing lets cold ai...
In Stock
Order now and your part arrives by Nov 23
If your refrigerator door does not open or close properly, its hinge may need a new bearing. This OEM part provides the pivot surface for the door hinge pin.
In Stock
Order now and your part arrives by Nov 23
$43.12
Airflow across the condenser coil is the job of this OEM refrigerator fan blade.
In Stock
Order now and your part arrives by Nov 23

Common Problems and Symptoms for KRTD20V3GW1

Viewing 15 of 15
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing
How to fix it
Door Sweating
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Light not working
Fixed by these parts
Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing Fixing
How to fix it
Freezer too cold
Fixed by these parts
Fixing
How to fix it
Too warm
Fixed by these parts
Fixing
How to fix it
Clicking sound
Fixed by these parts
Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Matthew from Washington, DC
Parts Used:
242193213
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Refrigerator door gasket torn
No instructions included, so it took a little bit of staring at the new part to figure out how it works. The barbed ridge on the gasket fits into a slot on the door. The flat face of the gasket has an internal magnetic strip that helps keep the seal tight against the steel face of the refrigerator. Installation requires no tools. This is the basic process:
1) Unbox the new gasket and get it ready to install so you don't have to leave the fridge open too long.
2) Open the door and grab the old gasket at one of the corners and pull away. This will unseat the barbed ridge I mentioned above. Work your way around the door until the whole gasket is free.
3) Set aside the old gasket
4) Grab a moistened paper towel and wipe down the (now exposed) sealing surface of the fridge and door.
5) Align the new gasket in the door and start pushing the barb into place. I found that the new gasket seemed slightly oversize compared to the original, so it took a little tweaking. What worked for me was to get all the corners seated, then work my way around the door making sure the gasket is fully seated.
6) Once you have the new gasket installed, close the door to make sure everything fits OK.
7) Open the door again and run your finger along the inside edge of the gasket seal. What you want to do is fold the edge of the gasket down so it lays flat against the outer wall of the door.
8) Shut the door and look from the sides and top to try to spot any gaps. You should be able to poke the gasket from the side and get the magnet strips to click into place. It seems like after a day or so the gasket 'relaxed' and I didn't have to worry about this anymore.
9) Dispose of the old gasket. I was able to pull the gasket into four pieces (separating at the corners) so it would fit in my city trash can...
317 of 336 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Greg from Hanover Township, PA
Parts Used:
5303918202
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
evaporator coil kept freezing up, refridgerator warm.
This was the second part I tried. The defrost timer was first, but that did not fix it. To do this I had to remove the ice maker and the back plate of the freezer. Then I defrosted the coil and cut the wires. stripped them back and installed the new thermostat. re-assembled and tested. has been working great ever since.
186 of 209 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Milton from Camp Hill, PA
Parts Used:
240524102
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Broke a blade off of the fan
When cleaning the coils on your refrigerator always remember rule number 1, unplug it first. I was cleaning the coils and hit the fan blade while it was moving with a brush, thus breaking off one of the fan blades. I ordered a new fan and installed it in about 15 minutes. Very easy repair.
79 of 88 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!