Models
>
LFTR1835VFA
LFTR1835VFA Frigidaire Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for LFTR1835VFA
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$27.76
This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.
In Stock
Order now and your part arrives by Mar 21
$19.90
This run capacitor is an essential electrical component that helps a refrigerator or freezer compressor start and operate efficiently. By storing and releasing electrical energy as needed, it supports...
In Stock
Order now and your part arrives by Mar 21
$24.10
This deli drawer carriage supports the shelf above the drawer and helps keep the drawer aligned and easy to use. It’s a genuine replacement for select Frigidaire top-mount refrigerators and installs e...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$25.15
This refrigerator evaporator fan blade is designed to attach to the evaporator fan motor and circulate cold air evenly throughout the refrigerator and freezer compartments. Made from durable black pla...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$47.33
This genuine deli drawer bin is designed to organize and store meats, cheeses, and snacks in the fresh food compartment of your refrigerator. Featuring a half-width design, it slides easily on existin...
On Order
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
$55.03
This defrost timer helps your refrigerator stay frost-free by controlling when it enters and exits the defrost cycle. It shuts off the compressor and activates the heater to melt ice buildup, then res...
In Stock
Order now and your part arrives by Mar 21
In Stock
Order now and your part arrives by Mar 21
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for LFTR1835VFA
Viewing 6 of 6Noisy
Fixed by these parts
How to fix it
Won’t start
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Too warm
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jack from WALLING, TN
- Parts Used:
- 241639502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Socket set
Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.
The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.
If your fan is still on the shaft, simply push it off ... Read more and extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
Hope this helps someone. :)
If your fan is still on the shaft, simply push it off ... Read more and extract it the same way. Then place the new one on the shaft.
In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.
Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.
Hope this helps someone. :)
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from Lockport, NY
- Parts Used:
- 241639502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One blade broke from condenser fan
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be ... Read more gan to make aloud noise, due to there not being enough clerance.
I removed the broken fan from the condenser. This was very sipmle.
When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be ... Read more gan to make aloud noise, due to there not being enough clerance.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from St. Petersburg, FL
- Parts Used:
- 5304519662
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Removed ice maker
Removed ice maker because it wasn't being used. Line Cover up and it snaps right in.
Was this instruction helpful to you?
Thank you for voting!