Models > FRSS2623AW6

FRSS2623AW6 Frigidaire Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for FRSS2623AW6

Viewing 9 of 9
Keep searches simple, eg. "belt" or "pump".
$26.35
For fastening a refrigerator or freezer door handle, this OEM screw has a #10-16 thread and is 1/2 inch long. It has a Phillips/Square drive. Confirm it matches your appliance before ordering.
In Stock
Order now and your part arrives by Nov 28
For your refrigerators water and ice system, this OEM filter uses a push-to-lock connection. Check your refrigerators model number before ordering to confirm compatibility. The filter is rated for 125...
In Stock
Order now and your part arrives by Nov 28
$25.25
This metal shoulder screw is used to secure a refrigerator or freezer door handle to the outer door panel. It is a number 10 AB handle mounting screw and is supplied as one piece. A missing screw, dam...
In Stock
Order now and your part arrives by Nov 28
This gray refrigerator door gasket creates a tight seal to help maintain proper cooling and energy efficiency. Made from flexible silicone with a magnetic strip, it’s a common fix for poor sealing, fr...
In Stock
Order now and your part arrives by Nov 28
This evaporator fan blade is used to move cooled air through the refrigerator or freezer compartments when driven by the fan motor. A cracked, warped, or loose blade may vibrate, strike nearby parts, ...
In Stock
Order now and your part arrives by Nov 28
If your freezer door isn’t sealing tightly or you’re seeing frost build-up, it might be time to replace the door gasket. This magnetic seal helps keep cold air inside and warm air out, making sure you...
In Stock
Order now and your part arrives by Nov 28
$15.04
Cross Recessed Pan Head Screw Size: 10-16 X 0.500
In Stock
Order now and your part arrives by Nov 28
Fasten the refrigerator or freezer hinge bracket to the cabinet structure with this mounting screw. Its 1/4-20 thread and 5/8 inch length suit the specified attachment, and the hex washer head accepts...
In Stock
Order now and your part arrives by Nov 28
In Stock
Order now and your part arrives by Nov 28
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
No Longer Available
In Stock
Order now and your part arrives by Nov 28
This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FRSS2623AW6

Viewing 14 of 14
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Door Sweating
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing Fixing
How to fix it
Frost buildup
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Fridge runs too long
Fixed by these parts
How to fix it
Freezer not defrosting
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cindy from AMARILLO, TX
Parts Used:
240597220
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
My fridge temp was warm. Freezer temp was ok, but fluctuated some.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
58 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
cletus from Godfrey, IL
Parts Used:
241786013
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
damaged gasket refrigerator door
pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks

P.S. Sorry about not having the model No.
The Part No was PS1991324 M agnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
alvin from staten island, NY
Parts Used:
241786013
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
refrigerator gasket is worn off
old gasket is very easy to pull off. putting the new gasket will only took me few minutes to put on, just make sure you press it firmly .everything works out right .
24 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!