Models > FRSS2623AD4

FRSS2623AD4 Frigidaire Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$38.06
This charcoal air filter is a genuine OEM replacement part for your refrigerator. The charcoal filter absorbs food odors, which in turn helps to ensure your ice tastes better. Ice tends to absorb smel...
In Stock
Order now and your part arrives by Mar 19
$24.10
This small, Phillips-head screw works with your refrigerator/freezer. It screws in to the freezer door and connects to the door handle. This part is made of stainless steel and is sold individually. T...
In Stock
Order now and your part arrives by Mar 19
The PurePour water filter (FPPWFU01) is a genuine Frigidaire replacement, compatible with select Frigidaire, Frigidaire Gallery, and Frigidaire Professional side-by-side and French door refrigerators....
In Stock
Order now and your part arrives by Mar 19
$23.05
Sold individually. This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
In Stock
Order now and your part arrives by Mar 19
This gray refrigerator door gasket creates a tight seal to help maintain proper cooling and energy efficiency. Made from flexible silicone with a magnetic strip, it’s a common fix for poor sealing, fr...
In Stock
Order now and your part arrives by Mar 19
In Stock
Order now and your part arrives by Mar 19
$25.15
This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.
In Stock
Order now and your part arrives by Mar 19
If your freezer door isn’t sealing tightly or you’re seeing frost build-up, it might be time to replace the door gasket. This magnetic seal helps keep cold air inside and warm air out, making sure you...
In Stock
Order now and your part arrives by Mar 19
$12.55
Cross Recessed Pan Head Screw Size: 10-16 X 0.500
In Stock
Order now and your part arrives by Mar 19
$10.92
10 - 32 x 0.375
In Stock
Order now and your part arrives by Mar 19
Sold individually.
In Stock
Order now and your part arrives by Mar 19
Sold individually.
In Stock
Order now and your part arrives by Mar 19

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for FRSS2623AD4

Viewing 13 of 13
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door Sweating
Fixed by these parts
Fixing Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Cindy from AMARILLO, TX
Parts Used:
240597220
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
My fridge temp was warm. Freezer temp was ok, but fluctuated some.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
48 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Ponca City, OK
Parts Used:
241684503
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
ice maker would not rotate out cube or crushed ice.
1. Remove outer plastic face cover (4) screws.

2. Revove (1) U type nut keeper & (1) metal washer.

3. Remove (1) plastic nut on end of metal auger.

4. Remove inner plastic cover (4) screws and disconnect control rod. (Note postion of control rod befor disconnecting)

5. Note position an d order of metal blades and plastic spacers on auger before siding off the end of auger to reposition them upon re-assembly.

6. Remove metal support panel from end of ice bucket (4) screws.

7. Remove auger & plastic cylinder from ice bucket.

8. Remove - slide drive blade off auger.

9. Drive blade replaced.

10. Re-assembled other items removed in reverse order
40 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
cletus from Godfrey, IL
Parts Used:
241786013
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
damaged gasket refrigerator door
pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks

P.S. Sorry about not having the model No.
The Part No was PS1991324 M agnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!