Models
>
FFSS2615TE2
FFSS2615TE2 Frigidaire Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FFSS2615TE2
Viewing 11 of 11
Keep searches simple, eg. "belt" or "pump".
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet w...
In Stock
$72.53
To ensure fresh, unscented, unflavored drinking water and ice, you will need to relace your water filter every 6 months or when the indicator light suggests. This NSF-Certified authentic water filter ...
In Stock
$13.20
This rear crisper support mounts on the inside of the refrigerator wall to support the rear crisper cover. It is made of white plastic and is sold as an individual part. The support is secured in plac...
In Stock
$43.04
This clear plastic refrigerator door shelf bin is located on the inside of the door. It is used to hold and organize items, such as jars and cans. Over time the shelf may crack, break, scratch or disc...
In Stock
$67.26
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
In Stock
$97.10
This is a genuine refrigerator door bin that holds items on the door of your appliance. This bin can be easily moved to accommodate for space. This bin is only available in clear plastic and replaces ...
In Stock
This is a refrigerator water inlet valve and mounting bracket. It is responsible for releasing water from the supply line when triggered, which makes its way through to the water dispenser and/or icem...
In Stock
The upper crisper drawer cover is the frame that supports the crisper drawer and holds the glass shelf. Excess weight and regular wear can cause damage to the frame, and if broken it should be replace...
In Stock
This is a shelf frame for your refrigerator. It supports the glass that sits above your meat pan or chill drawer. This white plastic manufacturer-approved part does NOT include the glass pane that it ...
In Stock
$137.59
The crisper drawer, also known as a crisper pan, is a clear plastic drawer found in your refrigerator. They typically hold fruits or vegetables, and the drawer has a slide control that will allow you ...
In Stock
$20.58
This is a genuine OEM kit for the defrost thermostat in your freezer. This kit comes with the clip, leads, and heat shrink. Some indicators that you may need to replace your thermostat is if there is ...
In Stock
$98.76
This is a replacement crisper glass insert for your refrigerator. It fits into the crisper pan frame and acts as the top of the crisper pan, as well as a shelf for food storage. Because it is made of ...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
February 14, 2023
how do u replace light bulb in frezzer?
For model number FFSS2615TE2
Hi Fred, thank you for your inquiry. Before you replace the freezer compartment light socket in your refrigerator, be sure to unplug the power cord, lift the ice bucket assembly up in the front, then pull it straight out. Use a quarter-inch socket or nut driver to loosen the two icemaker mounting screws. Lift the icemaker off of the screws and disconnect the wire connector. Next, unthread the lower screws. After securing the ice auger drive motor assembly, depress the tab to disconnect the wire harness. You can now lift the assembly up and out. Unthread the light bulb. Thread the new light bulb into the socket, being careful not to overtighten it. Reinstall the ice auger drive motor assembly by hooking the tabs into the slots in the support rails, threading the two lower screws, and connecting the wire harness. Reinstall the icemaker by first connecting the wire connector. Align the ice maker on the fill tube and the mounting screws, then tighten the screws and reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back. Plug the power cord back in and restart your refrigerator. We hope this is what you were looking for!
Was this helpful?
Thank you for voting!
Common Problems and Symptoms for FFSS2615TE2
Viewing 22 of 22Leaking
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Fridge too cold
Fixed by these parts
How to fix it
Light not working
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Freezer not defrosting
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Won’t start
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Clicking sound
Fixed by these parts
How to fix it
Too warm
Fixed by these parts
How to fix it
Frost buildup
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Ice maker dispenses too little ice
Fixed by these parts
How to fix it
Freezer too cold
Fixed by these parts
How to fix it
Ice maker dispenses too much ice
Fixed by these parts
How to fix it
Door Sweating
Fixed by these parts
How to fix it
Fridge runs too long
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jose from Alexandria, VA
- Parts Used:
- 242252702
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers, Wrench (Adjustable)
water leaking out of refrigerator
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the
... Read more
valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MONICA from LANCASTER, CA
- Parts Used:
- 240351601
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
freezer shelf broke
Easy slide it back in place
Was this instruction helpful to you?
Thank you for voting!
Support studs were broken
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food and crisper drawers.
Was this instruction helpful to you?
Thank you for voting!