The water filter in your refrigerator should be replaced every six months in order to provide clean, fresh tasting water. The filter absorbs impurities in the water like heavy metals, pesticides, and ...
Designed for smooth drawer operation, this crisper pan roller attaches to the sides of the refrigerator’s crisper drawer, allowing it to slide in and out effortlessly. Over time, rollers can wear down...
If your fridge isn’t making ice or is leaking, this replacement ice maker can help. It includes everything needed to freeze and dispense ice automatically. It’s easy to install and works with many bra...
This refrigerator door bin is designed to fit securely onto the interior door brackets of compatible models, providing a convenient space to store bottles, jars, and other items. Made from clear plast...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
Designed for 36-inch French-door refrigerators, this GREY magnetic door gasket ensures a secure seal to prevent air leaks and maintain optimal cooling conditions. It plays a critical role in regulatin...
Crisper drawer cover assembly for select Frigidaire refrigerators. Includes a durable plastic frame and a glass insert that sits above the crisper drawers, forming a shelf while helping regulate humid...
If your freezer drawer isn’t sealing like it used to, this gray gasket might be the fix. It helps keep cold air inside and warm air out, so your food stays fresh and your appliance doesn’t have to wor...
This is an adjustable foot for your freezer, refrigerator, and dryer. This part supports your unit by screwing into one of the bottom four corners, and adjusting the height of your machine. If your ap...
In Stock
Order now and your part arrives by May 8
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
May 12, 2024
I order upper and lower mullion pins but the pieces they slide on to are broken. Is there a fix for this?
For model number FFHB2750TD8
Hi Charles, thank you for your inquiry. To fix this issue, you may need to replace the right door assembly, part number FIX12177152, as the part on which mullion pins slides on does not come separately. It comes as a part of the door assembly. We hope that helps!
After a power surge my readout on the panel in front keeps displaying sy cf. when I try to change temp it displays cabinet locked. I cannot unlock it
For model number FFHB2750TD8
Hi Nancy, thank you for the question. The SY CF error code relates to a communication issue between the control board and the display board; this could be the control board, the display board or the wiring harness or its connections at fault. Check the wire harness of the main control board and interface control board. If they are fine, the main control board, part number FIX12176320, is by far the more likely part that has failed. Glad to be of help!
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There i
... Read mores 2 screws holding the solenoid in place and one ground wire. This was an easy fix and I know I saved a lot of money.
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension
... Read more to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used
... Read more my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
