This white plastic door shelf retainer bar is used to keep bottles, jars, and condiments on the refrigerator shelf as the door is moved. It snaps into the inner door mounting points without tools and ...
Bottles, jars, and condiments stay contained behind this white plastic refrigerator door shelf retainer bar. The rail attaches to the inner fresh food door and forms a barrier along the shelf edge, he...
Supporting the meat or deli drawer from the right side, this refrigerator drawer slide rail keeps the pan level and guides it during opening and closing. The rail attaches to the interior cabinet wall...
This clear plastic crisper pan is used to provide a separate storage space for fruits and vegetables in the refrigerator fresh food section. You can see the stored contents through the transparent sid...
A clear food-storage surface above the crisper drawers is provided by this glass shelf insert. Measuring approximately 23.82 inches wide by 15.5 inches deep, it fits into the existing supporting frame...
This left side refrigerator drawer rail supports the meat or deli pan and guides it as it slides open and closed. Smooth drawer movement depends on a stable support rail. Installing a replacement for ...
This is a genuine OEM replacement crisper drawer cover for your refrigerator. It measures approximately 27 inches by 20 inches and does not include the glass insert for the self. You can reuse the gla...
This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM...
Four #10-16 screws secure a refrigerator or freezer door handle to the door. This OEM kit includes screws that are 0.500 in. long, with a Phillips or square drive. Confirm compatibility with your appliance before buying.
The run capacitor helps the compressor start and supports its operation in a refrigerator or freezer. This OEM replacement has a capacitance of 15 MFD. Check fit against your appliance model before or...
This clear plastic dairy door is used to cover the dedicated storage compartment on the inside of the refrigerator door. The hinged lid lifts to provide access to butter, cheese, and other stored item...
For fastening a refrigerator or freezer door handle, this OEM screw has a #10-16 thread and is 1/2 inch long. It has a Phillips/Square drive. Confirm it matches your appliance before ordering.
In Stock
Order now and your part arrives by Nov 28
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
August 8, 2023
How do you disconnect the wiring harness for a Frigidaire refrigerator model FFTR1821TB4?
For model number FFTR1821TB4
Hi James, thank you for your inquiry. To disconnect the wiring harness follow these steps:
1- To make it easier to access the power cord grounding wire mounting screw, you can move the compressor out of the way.
2- Pull off the three retaining pins and remove the washers.
3- Now carefully lift up the compressor and move them to the right.
4- Un-thread the screw securing the power cord retaining clip as well as the screw securing the grounding wire.
5- You can now disconnect the wire connecter to fully remove the old power cord.
We hope this information is useful!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pul
... Read moreled off the control knob, unclipped the cold control, unplugged the three wires to the control, then removed the styrofoam insulation blocks holding the thermocouple wire and then removed the thermocouple wire to complete the removal. I then reversed the process to install the new thermostat and control. That is repositioned the thermocouple wire, put the insulation blocks back to hold the wire, then replugged the three electrical wires, clipped the control back and pushed the control knob back on and finally screwed the panel back to the top of the main compartment and plugged the refrigerator electrical cord back in to provide current to the refrigerator. It immediately started up and ran fine. Total time - about 8 minutes.
pan-crisper pan was easy because is just slide in. the drawer support rail just took a screwdriver to unscrew the screw and replace it with new rail and put the screw back in. The thing I like the best is the fast service of the parts to me.