Models
>
DYF48BNDI00
DYF48BNDI00 Dacor Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for DYF48BNDI00
Viewing 12 of 12Keep searches simple, eg. "belt" or "pump".
$36.42
If the cap for your water filter has become damaged, this is an authentic OEM replacement part that is black in color. The cap is used to remove the old filter and insert the new one. Be sure to first...
In Stock
Order now and your part arrives by Nov 23
$31.05
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 23
$19.69
Bring light back to the appliance?s interior with this incandescent bulb. Light from its filament spreads through the clear glass, making stored items easier to locate and reach. A damaged bulb or bur...
In Stock
Order now and your part arrives by Nov 23
$28.91
The white, four-blade OEM evaporator fan blade moves cold air over your refrigerators evaporator coils. A noisy fan or a warm refrigerator can indicate a problem with the blade. Check your refrigerato...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$103.17
This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.
In Stock
Order now and your part arrives by Nov 23
$179.65
This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.
In Stock
Order now and your part arrives by Nov 23
$61.55
This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$86.34
The condenser fan motor moves air across the refrigerators condenser coil and compressor. If your refrigerator is not cooling properly, check the fan blade for obstructions and see if it turns freely....
In Stock
Order now and your part arrives by Nov 23
$7.60
This light socket is a genuine OEM part for your refrigerator. The light socket powers the bulb that lights your fridge. To repair this part, you will need to remove the screws holding the control pan...
In Stock
Order now and your part arrives by Nov 23
Common Problems and Symptoms for DYF48BNDI00
Viewing 12 of 12Light not working
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Fridge too cold
Fixed by these parts
How to fix it
Too warm
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Clint from Rayville, MO
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from Leesburg, FL
- Parts Used:
- WP627985
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
No ice in ice trey
The easiest thing to do was pull the ice make off. After taking the 3 screws out of the wall of the freezer, take a screwdriver (flathead) and push on the tab for the electrical plug and wiggle the cord out. Then you can take 3 screws out for the main cover and another 2 screws on the next cover. There's the part, pop it out and replace h
... Read more
olding pins and start the process of putting back together the opposite way you took it apart.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from Sacramento, CA
- Parts Used:
- WP2260518B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Missing the cap on the water filter, made it really hard to replace the filter
Removed the filter and put the cap on the new filter and inserted it as instructed on the filter box. Really easy now that we have the new cap.
Was this instruction helpful to you?
Thank you for voting!