Models > GFS207

GFS207 (MN01) Caloric Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GFS207

Viewing 10 of 10
Air Flow Parts Diagram and Parts List for MN01 Caloric Refrigerator
Air Flow Parts
Cabinet Parts Diagram and Parts List for MN01 Caloric Refrigerator
Cabinet Parts
Control Parts Diagram and Parts List for MN01 Caloric Refrigerator
Control Parts
Freezer Door Parts Diagram and Parts List for MN01 Caloric Refrigerator
Freezer Door Parts
Freezer Liner Parts Diagram and Parts List for MN01 Caloric Refrigerator
Freezer Liner Parts
Ice Maker Parts Diagram and Parts List for MN01 Caloric Refrigerator
Ice Maker Parts
Refrigerator Door Parts Diagram and Parts List for MN01 Caloric Refrigerator
Refrigerator Door Parts
Refrigerator Liner Parts Diagram and Parts List for MN01 Caloric Refrigerator
Refrigerator Liner Parts
Unit Parts Diagram and Parts List for MN01 Caloric Refrigerator
Unit Parts
Unit Parts Diagram and Parts List for MN01 Caloric Refrigerator
Unit Parts
Keep searches simple, eg. "belt" or "pump".
Condenser Fan Motor Kit – Part Number: 833697
$63.12
This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a mounting nut for the blade and a cushion. This part provides forced-air cooling for the condenser coil.
In Stock
Filter Drier Tube – Part Number: W10843121
$38.09
This filter dryer is for refrigerators and filters refrigerant that travels through the sealed system of the refrigerator.
In Stock
Fuse – Part Number: WPW10017410
$19.25
In Stock
DISCONTINUED – Part Number: 502804
No Longer Available
THERMOSTAT,COOL-DOWN – Part Number: 56590
No Longer Available
LABEL-NATURAL – Part Number: 311162
No Longer Available
STICKER – Part Number: 56529
No Longer Available
SUPPORT, L.H. – Part Number: 56933
No Longer Available
TIMER – Part Number: 56503
No Longer Available
SPACER,TIMER – Part Number: 56502
No Longer Available
PLATE,TERMINAL BRACKET – Part Number: 56549
No Longer Available
Assembly,WIRING HARNESS – Part Number: 56505
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GFS207

Viewing 8 of 8
Fridge too warm
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Too warm
Fixed by these parts
Fixing
How to fix it
Replacing the Condenser Fan Motor Kit

Replacing the Condenser Fan Motor Kit

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tom from Franklin, WI
Parts Used:
833697
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
Sometimes the condenser fan would start causing the refrigerator to overheat.
Unplug the appliance.
Removed the screws holding the back panel.
Removed the fan blade.
removed 3 screws holding the condenser fan.
Remove the 3 metal brackets attached to the fan.
(First note which studs the brackets are attached to. Attach the 3 metal brackets to the new fan. (New screws were supplied)
Cut and strip the wire about two inches from the fan.
Cut and strip the new wire. I cut the new wire in half (about 6 inches.) Connect the two wires, twist and used 2 wire nuts. Tie wrap the wire to the wire harness. Mount the new fan (three screws)
Screw the back panel back on.
Mount the new
Read less
180 of 209 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
robert from nashotah, WI
Parts Used:
833697
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
noisy fan motor
rmv panel (5min) rmv fan/motor 3 screws (10 m) cut wire 2in from motor, re route remainder of wire to front so can strip for wire nuts. ( 10m) attach old fan to new motor, place in old opening ,3 screws, a little fussy to align, ( 15m ) route and strip wire from new motor , zip ties work well, wire nuts , plug in fridge vola, no noise, c lose up, reverse panel. ( 20m). i also took time to clean grilles with small vac and damp rag, ( looks and sounds like new) bob Wi.
Read less
37 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janet from Hillsboro, OR
Parts Used:
833697
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Freezer and Fridge wouldnt cool
My husband replaced the condenser fan. It took awhile and a few choice words but he got it replaced. The fan seemed to work fine, but it still wasn't cooling. I noticed that when we had the fridge unplugged that water started draining out the dials at the top of the fridge under the freezer. And there was absolutely no water at all in the drip pan under the fridge. So I took the doors off and totally took the inside of the freezer apart. I discovered that the styrofoam on the floor of the freezer had become inudated with fluid and the under the foam the coils were all frozen solid with ice. Hence not allowing any drainage. I put a lamp in the freezer area and defrosted all the ice. In searching the internet i discovered that they no longer produce the foam so i went to home depot and got a piece of foam and aluminum foil and cut it to replace the ruined foam. I put the fridge all back together said a prayer and crossed my fingers and lo and behold it works perfectly now!!!!
Read less
24 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More