B22CT80SNS (01) Bosch Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The gasket seals on the two refrigerator doors had deteriorated and the single freezer drawer gasket had begun to deteriorate.
- Prior to ordering the gaskets, I went online to make sure the installation was something I could readily do—it is really easy.
- When I received the gaskets, I laid them out on a flat surface, but as per the product description, they had become distorted in the shipping container. At first I thought one was severely distorted, but it was turned “inside out.”
- I followed the directions to use a hair dryer to heat the rubber material until it returned to its original shape: about 15 minutes for each gasket.
- With a little effort, the old gaskets pop out and the new ones pop into a groove (I ran my fingers firmly over the installed gaskets to make sure they were securely installed.).
- Everything appears to fit perfectly: problem solved!
- When I received the gaskets, I laid them out on a flat surface, but as per the product description, they had become distorted in the shipping container. At first I thought one was severely distorted, but it was turned “inside out.”
- I followed the directions to use a hair dryer to heat the rubber material until it returned to its original shape: about 15 minutes for each gasket.
- With a little effort, the old gaskets pop out and the new ones pop into a groove (I ran my fingers firmly over the installed gaskets to make sure they were securely installed.).
- Everything appears to fit perfectly: problem solved!
Was this instruction helpful to you?
Thank you for voting!