Models
>
GB2026LEKS13
GB2026LEKS13 Amana Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GB2026LEKS13
Viewing 7 of 7Keep searches simple, eg. "belt" or "pump".
This refrigerator pantry drawer door cover keeps pantry foods covered and easy to see. Its white frame and clear window enclose the drawer while letting you spot meats, cheeses, and snacks at a glance...
In Stock
Order now and your part arrives by Nov 22
$50.36
The white endcap snaps onto the right side of your refrigerator pantry drawer to support it. This is an OEM replacement. Check your refrigerators model number to confirm compatibility.
In Stock
Order now and your part arrives by Nov 22
$55.18
To support the drawer and help keep it aligned as it slides open and closed, this left-side refrigerator pantry drawer end cap mounts to the interior wall and provides a connection point for the pantr...
In Stock
Order now and your part arrives by Nov 22
$31.05
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 22
$31.05
A three-terminal rocker arm switch controls a refrigerator light and fan circuit. It is an OEM replacement switch for that circuit.
In Stock
Order now and your part arrives by Nov 22
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
In Stock
Order now and your part arrives by Nov 22
In Stock
Order now and your part arrives by Nov 22
$50.36
To help release heat from the cooling system, this refrigerator condenser fan blade mounts onto the condenser fan motor shaft and moves air across the condenser coils. A cracked, bent, or loose blade ...
In Stock
Order now and your part arrives by Nov 22
$20.72
Help the two sides of the refrigerator drawer travel together with this slide gear kit. Its replacement gears guide the sliding mechanism for even opening and closing. Binding, uneven pulling, or a lo...
In Stock
Order now and your part arrives by Nov 22
On Order
$147.72
Glass Only. Frame not included. This refrigerator crisper drawer cover insert is for refrigerators.
Crisper drawer cover insert fits into the crisper drawer cover frame and covers the crisper drawe...
In Stock
Order now and your part arrives by Nov 22
$159.88
This freezer door gasket is used to create a tight seal that keeps cold air inside and warm air carrying moisture out. The black magnetic seal fits around the inner edge of the door and helps maintain...
In Stock
Order now and your part arrives by Nov 22
Common Problems and Symptoms for GB2026LEKS13
Viewing 16 of 16Light not working
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Fridge too cold
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Frost buildup
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Freezer not defrosting
Fixed by these parts
How to fix it
Freezer too cold
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Door Sweating
Fixed by these parts
How to fix it
Fridge runs too long
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gregory from Bethesda, MD
- Parts Used:
- WP12656105, WP12656018
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clint from Rayville, MO
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from destin, FL
- Parts Used:
- WP67002493, W11673433
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
no cold air coming into refrigerator area, all frozen up
first I looked into the refrigerator for blockage of air flow.
none found, I looked into the freezer area to see if fan was working ,it was, noticed ice built up on the outside of the metal cover letting me know it was not defrosting ,It was easier for myself to pull freezer door off , then the ice-maker,only three 1/4" hex head bol ... Read more ts,two 1/4" hex bolts only holding the metal cover . The quickest way to defrost was using a blow hair drier .once it was all defrosted I disconnected the defrost heater and using a volt/ohm meter,I ohm out the element,finding out I had no reading .The one thing I forgot to mention, unplug the frigertor first !!!
none found, I looked into the freezer area to see if fan was working ,it was, noticed ice built up on the outside of the metal cover letting me know it was not defrosting ,It was easier for myself to pull freezer door off , then the ice-maker,only three 1/4" hex head bol ... Read more ts,two 1/4" hex bolts only holding the metal cover . The quickest way to defrost was using a blow hair drier .once it was all defrosted I disconnected the defrost heater and using a volt/ohm meter,I ohm out the element,finding out I had no reading .The one thing I forgot to mention, unplug the frigertor first !!!
Read less
Was this instruction helpful to you?
Thank you for voting!