Models
>
GB2026REKS4
GB2026REKS4 Amana Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GB2026REKS4
Viewing 8 of 8Keep searches simple, eg. "belt" or "pump".
This refrigerator pantry drawer door cover keeps pantry foods covered and easy to see. Its white frame and clear window enclose the drawer while letting you spot meats, cheeses, and snacks at a glance...
In Stock
Order now and your part arrives by Nov 28
$50.36
The white endcap snaps onto the right side of your refrigerator pantry drawer to support it. This is an OEM replacement. Check your refrigerators model number to confirm compatibility.
In Stock
Order now and your part arrives by Nov 28
$55.18
To support the drawer and help keep it aligned as it slides open and closed, this left-side refrigerator pantry drawer end cap mounts to the interior wall and provides a connection point for the pantr...
In Stock
Order now and your part arrives by Nov 28
$31.05
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 28
$31.05
A three-terminal rocker arm switch controls a refrigerator light and fan circuit. It is an OEM replacement switch for that circuit.
In Stock
Order now and your part arrives by Nov 28
$45.00
To carry defrost water away from the freezer, this refrigerator drain tube kit directs melted frost into the drain pan beneath the appliance, where the water can evaporate. The updated curved tube rep...
In Stock
Order now and your part arrives by Nov 28
$7.60
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by Nov 28
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
No Longer Available
$28.91
The white, four-blade OEM evaporator fan blade moves cold air over your refrigerators evaporator coils. A noisy fan or a warm refrigerator can indicate a problem with the blade. Check your refrigerato...
In Stock
Order now and your part arrives by Nov 28
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
In Stock
Order now and your part arrives by Nov 28
This kickplate grille is attached to the bottom of the refrigerator.
In Stock
Order now and your part arrives by Nov 28
$20.72
Help the two sides of the refrigerator drawer travel together with this slide gear kit. Its replacement gears guide the sliding mechanism for even opening and closing. Binding, uneven pulling, or a lo...
In Stock
Order now and your part arrives by Nov 28
Common Problems and Symptoms for GB2026REKS4
Viewing 14 of 14Light not working
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Frost buildup
Fixed by these parts
How to fix it
Freezer not defrosting
Fixed by these parts
How to fix it
Fridge too warm
Fixed by these parts
How to fix it
Fridge too cold
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Freezer section too warm
Fixed by these parts
How to fix it
Not dispensing water
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Too warm
Fixed by these parts
How to fix it
Door Sweating
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gregory from Bethesda, MD
- Parts Used:
- WP12656105, WP12656018
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Broken pins holding pantry door
Removed door and crisper pans.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Removed nuts on left end cap - think there were 3.
Removed nuts on right end cap and one or two on back air regulator attached to right end cap.
Replaced left end cap with new one using reserved nuts.
Carefully removed back air regulator from right end cap.
Attached back air regula ... Read more tor to new right end cap.
Replaced right end cap and back air regulator and attached with nuts.
Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps.
Replaced crisper pans.
That's it.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from DINUBA, CA
- Parts Used:
- W10619951
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Water leaking from bottom of refrigerator onto floor
The video on website is very good and explains everything in detail. Just follow the directions. This is EASY!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clint from Rayville, MO
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this instruction helpful to you?
Thank you for voting!