Models > RDE1300P2

RDE1300P2 Whirlpool Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Bake Element - 240V 2100W – Part Number: 326791
$38.06
The bake element is found in the bottom of the oven and is used to provide the heat necessary to cook or bake. If your oven is not coming up to temperature, will not heat up at all, or has inconsisten...
In Stock
Order now and your part arrives by Mar 19
Range Surface Burner Knob – Part Number: WP307458
$20.95
This knob is sold individually.
In Stock
Order now and your part arrives by Mar 19
Broil Element – Part Number: 326795
This five loop broil element has a hanger style mount.
No Longer Available
THRMST-OVN – Part Number: 660536
No Longer Available
DISCONTINUED – Part Number: 261680
No Longer Available
BAR-TORSIN – Part Number: 327741
No Longer Available
BAR-TORSIN – Part Number: 327742
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for RDE1300P2

Viewing 3 of 3
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Chad from Bloomington, MN
Parts Used:
326791
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Baking element in oven exploded
Removed the broken element by taking out the two screws in the back wall of the oven and unplugging the wires. Then did reverse to install the new element. Very simple repair job.
57 of 62 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randy from Flagstaff, AZ
Parts Used:
326791
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Bottom heating element had burned out.
turned off the breaker (240 volts and it was outside, so it took longer than 15 minutes). Removed two screws in the back of the oven, one on each side of the old element, and pulled the old element forward. The wires on the back add some resistance, but they are long enough to pull forward a short distance (3 inches) without damage. Unpl ugged the old element, plugged in the new element, pushed it into place, and reinstalled the screws. Turned the power back on and it worked! Saved some money for the holidays! DIY para vida!
Read less
27 of 29 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Fort Lauderdale, FL
Parts Used:
326791
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bake Element Was Burned Out
Turned the circuit breaker off. Removed the 2 screws holding the element in place, pulled the element out far enough to access and disconnect the wires. Installed the new element by reversing the process. Success - wife is happily baking again!
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More