Models > 1423^0A

1423^0A Whirlpool Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 1423^0A

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$22.91
This lid or door switch kit helps ensure your washer or dryer only runs when the door is properly closed. It’s a safety feature that prevents spills and keeps your appliance working as it should. The ...
In Stock
Order now and your part arrives by Jul 30
This lower dishwasher rack is a genuine replacement component designed to provide flexible and secure loading for both small and large dishware. Measuring approximately 22 inches by 21 inches, it feat...
In Stock
Order now and your part arrives by Jul 30
This gray upper dishrack kit fits select dishwashers. It requires assembly, and non-adjustable models may need roller transfer. The updated design may differ slightly but functions the same.
On Order
10-32 hex - Sold Individually - Appliance originally takes 3 of this item.
In Stock
Order now and your part arrives by Jul 30
This five loop broil element has a hanger style mount.
No Longer Available
This thermostat is used for Canadian models only.
In Stock
Order now and your part arrives by Jul 30
No Longer Available
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
No Longer Available
No Longer Available
Special Order
No Longer Available
No Longer Available

Common Problems and Symptoms for 1423^0A

Viewing 4 of 4
Will Not Start
Fixed by these parts
Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing
How to fix it
Won’t Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kenneth from Wilmington, IL
Parts Used:
W10820036
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Lid closes, switch wouldn't turn on machine.
Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. Time on my job doesn't, just that their service and expertise that is available to everyone is there to use. Broken bones or not, I will always get my parts and advice from PartSelect. Thanks to PartSelect.
31 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glen from Plano, TX
Parts Used:
W10820036
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Washer would fill up, wash, then stop
I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed it on it's side on the floor. Here I could reach the switch. Removed old, installed new and reversed the process.

The part that gave me the biggest problem was setting the casing back on to the frame. You have to slide the front part in at the bottome, then lean back the rest of it.
22 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
pat from muncy, PA
Parts Used:
W10311986
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
bottom rack was starting to rust away and we needed a new one
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect
19 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!