Models > 11-1969-10

11-1969-10 (05) Tappan Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$125.37
This bake element is found on the bottom of the oven.
In Stock
Order now and your part arrives by Mar 19
This broil element is found on the roof of the oven cavity.
In Stock
Order now and your part arrives by Mar 19
No Longer Available
Sold Individually. This knob accepts a double-flat shaft.
No Longer Available
No Longer Available
$153.61
Special Order
No Longer Available
No Longer Available
No Longer Available
No Longer Available
$127.95
Special Order
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 11-1969-10

Viewing 2 of 2
Element will not heat
Fixed by these parts
Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Delaware, OH
Parts Used:
318255101
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Element showed a hot spot prior to failing open.
Replaced element. Removed shelves, removed two screws and lifted/wiggles old element out to pull wires off at connectors. Reversed process installing new element and truned on to test/burn off "newness" Done!
29 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jack from atlanta, GA
Parts Used:
318255101
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bad lower oven coil
turned off power, removed 2 screws replaced heater coil tightened screws.
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jennifer from Stockton, CA
Parts Used:
318255101
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
minimal/no heat
turned off main power; took a flash light, unscrewed existing element and disconnected it from the wiring; compared existing with new elements as the shipping label said "ABSOLUTELY NOTHING MAY BE RETURNED IF IT APPEARS THAT IT HAS BEEN INSTALLED"; it appeared to be close enough but not exact. Connected wiring to new element, shoved it b ack into the insultation, screwed in the element with the same screws. Viola' all worked as it should. I even set my oven on the "self clean" cycle which is 3 hours on high. Overall it was very easy.
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!