Models > 30-2603-00

30-2603-00 ((04)) Tappan Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Flat Style Oven Igniter – Part Number: 5303935067
$62.16
This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.
In Stock
Front Burner – Part Number: 5303204154
No Longer Available
IGNITOR-TOP BURNER – Part Number: 316081701
No Longer Available
PAN-BROILER – Part Number: 5303013568
$68.00
Special Order
KNOB-CLOCK – Part Number: 316029008
$34.62
Special Order
BURNER – Part Number: 5303204155
$44.41
Special Order
VALVE – Part Number: 774T121P01
No Longer Available
MAIN TOP – Part Number: 5303200658
$235.84
Special Order
INDICATOR – Part Number: 318T023P01
$12.00
Special Order
DISCONTINUED – Part Number: 318T023P02
$25.09
Special Order
WHITE – Part Number: 3200657
$156.01
Special Order
DISCONTINUED – Part Number: 591T070P01
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 30-2603-00

Viewing 1 of 1
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from Chaska, MN
Parts Used:
5303935067
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
igniter failed
take broiler oven door off. replaced the wire clip on one side of the two wire harness. on the other side, I clipped the other wire, used the wire sripper too strip each side of the wires and used the ceramic wire nut that came with the kit. I did not have to remove any part of the stove for this job. twisted the wire nut on, and my job w as done ! replaced the broiler door and you finally are able to cook your famous meat loaf ! Mike
Read less
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from GLEN MILLS, PA
Parts Used:
5303204154
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Rusted out front burner
remove screw, remove burner, install new burner and screw
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from ELMIRA, NY
Parts Used:
5303935067
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Oven wouldn't light.
My existing igniter glowed but the oven still did not light. I determined it was too weak to activate the gas valve so I replaced it. Simple fix, four screws, wire nutted the two leads. Fired right up, took about 30 minutes to replace.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More