This display board is for ranges.
Display board receives signals from the control board and displays the time and temperature settings.
Unplug the range or shut off the circuit breaker before in...
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shaul
October 13, 2021
Oven gets too hot - error code c-21
For model number NE59J7630SS
Hello Shaul, Thank you for your inquiry. The C21 error code does indicate that the oven is overheating, so we recommend the following parts to fix your issue: the temperature sensor, the high limit thermostat, and the bake and broil elements. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We also recommend checking the wiring harness for any visible damage. Good luck with your repair.
My Samsung range front burners left and right both always stays on high heat, i am unable to reduce the heat so i am wondering that both switches need to be replaced, the part numbers on the switches are (right 160321 per001 13t) (left 160401 per001 02d. Could you please advise which parts i would need to order.Look forward to hearing from you.
thanks
sunita
For model number NE59J7630SS
Hi Sunita,
Thank you for your question. If your front burners stay on high heat, you will need to check the burners, the infinite switches and the terminal block. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range
... Read more had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
I removed the control panel with a Phillips screwdriver and unplugged the burner switch and replaced the new switch and put the control panel back in place and turned on the burner and it worked as it should.i realized that I only would have only had to remove the 4 screws on the bottom of the control panel. All I would have had to do was
... Read more just take those 4 screws out and remove the switch control knob and the two screws that held the switch in. Am very happy with the results