Models
>
NX58M6850SG
NX58M6850SG (AA-02) Samsung Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for NX58M6850SG
Viewing 2 of 2Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$101.77
The Samsung Range Surface Burner Valve (Part Number DG94-00934A) is a critical component for ensuring your range operates safely and efficiently. This valve specifically manages the gas flow to the le...
In Stock
Order now and your part arrives by Nov 23
On Order
In Stock
Order now and your part arrives by Nov 23
Special Order
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$304.40
This safety valve assembly is a replacement control component designed to regulate and shut off gas flow when required. It is commonly replaced when valves fail to open properly or safety functions are compromised.
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Floyd from Neptune, NJ
- Parts Used:
- DG94-00934A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Wrench set
Had to replace rear left burner valve assembly.
Reviewed several YouTube videos indoor to ensure the easiest way to make the repair. Unplug from power and turn off gas. Removed all grates and burner covers. Unscrewed all burner cups from top panel with a #2 Phillips . Pried loose top cover retaining clips with scraper and lifted top panel off of range. removed control knobs from front
... Read more
panel. Unscrewed five screws from front panel (2 on top corners, 3 on underside of front panel) and removed front panel. Note front panel has sharp edges, may want to use gloves. Carefully removed igniter assembly from valve. Using wrench disconnect gas line to burner cup from valve, unscrew two retaining screws from old valve. Gently remove old valve from main gas line, carefully install new valve with mounting two screws removed earlier, connect gas line from burner cup. Carefully replace the igniter assembly on valve. Replace front panel, top panel and secure all burner cups to top panel. reseat all burners and covers. Plug back into power and turn gas on, test all burners and ensure there are no gas leaks.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from WASHINGTON, DC
- Parts Used:
- DG94-00550A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Slider Assembly in Oven Warming Drawer
Install handled by building engineer...thankfully. Did not take long for him, however, to install both sides of the drawer.
Was this instruction helpful to you?
Thank you for voting!