Models > NE58F9500SS-(AA

NE58F9500SS-(AA ((AA-01)) Samsung Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for NE58F9500SS-(AA

Viewing 5 of 5
Control Panel
Cooktop
Door
Drawer
Main
Keep searches simple, eg. "belt" or "pump".
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for NE58F9500SS-(AA

Viewing 1 of 1
Door won’t open after self cleaning cycle
Fixed by these parts
How to fix it
Back to Top
Replacing the Range Convection Fan Motor Assembly play video

Replacing the Range Convection Fan Motor Assembly

Replacing the Upper Fan Blade play video

Replacing the Upper Fan Blade

Replacing the Rubber Cushion play video

Replacing the Rubber Cushion

Back to Top View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Uwe from FORT COLLINS, CO
  • Parts Used:
    DE47-20037A
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Oven shut off during self clean cycle and door stayed locked.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Judith from WASHINGTON, DC
  • Parts Used:
    DG94-00550A
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
Slider Assembly in Oven Warming Drawer
Install handled by building engineer...thankfully. Did not take long for him, however, to install both sides of the drawer.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Brian from SCHENECTADY, NY
  • Parts Used:
    DE47-20037A
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Oven wouldn’t heat to temperature after self cleaning
Pulled off the back panel (6 screws) thermostat was right there removed 2 wires and replaced with new put the panel back on done
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More