FCQ321HSUW Samsung Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Steven from CHEYENNE, WY
- Parts Used:
- DG32-00002B
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Oven would not heat consistently
My barely 4 year old Samsung range/oven began not heating consistently. Even though it said 350, for example, we had to increase to 465 to get it to bake. Thought it was the temperature sensor. Ordered and installed new one easily. That didn't solve the problem. So, rather than throw more money at parts that may not have resolved the issue, I got a new Amana range. Samsung appliances go to my 'do not buy' list along with LG!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from Hooksett, NH
- Parts Used:
- DG44-01002A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Dual burner only operates on high, no matter the setting
Followed video at the link below.
https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
https://www.bing.com/videos/search?q=how+to+replace+infinity+switch+in+samsung+electric+range&docid=607999620772294704&mid=702E9DF006DF9B180DAA702E9DF006DF9B180DAA&view=detail&FORM=VIRE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DAVID from BIRDSBORO, PA
- Parts Used:
- DG32-00002B
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
oven will not come to desired temp setting
ordered the temp sensor for a standard complaint, new sensor was the correct part ordered, however, once the old sensor was removed, I ohm'd the original and the new part. Both were 1080, checked wiring, checked gas burner, checked line voltage. Searched other part prices, found Samsung to be a not desirable product to own. This non repair was to help my neighbor who lives on a fixed income. Checked oven temp with the oven at 350 f setting, oven was 223 f. Set oven to 465 f and fount the oven at 353 f. I wanted to return the part but she insisted I install it anyway and found the oven doing the same thing. She did not want to throw more money at a 4 year old range. Will use it as it is but will buy a cheap oven temp gauge. Samsung sucks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- irene from MERIDEN, CT
- Parts Used:
- DG44-01002A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
front burner stayed on high
put in new dual element switch
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allen D from AMES, IA
- Parts Used:
- DG32-00002B
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Oven was too hot and wouldn’t keep correct temp.
Remove back sheet metal covers. Disconnect temp. Sensor. Open oven door and remove grates. Remove two screws holding sensor to back oven wall. Pull out and then replace with new one. Assemble connections in back and replace sheet metal covers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Edenton, NC
- Parts Used:
- DG44-01002A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Heat element was always in high
Kill the power
Remove back of range
Pull off know and remove switch
Note the wire placement and wire the new switch
Mount new switch and replace back
Turn power back on
Remove back of range
Pull off know and remove switch
Note the wire placement and wire the new switch
Mount new switch and replace back
Turn power back on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from BEMIDJI, MN
- Parts Used:
- DG32-00002B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Weak thermostat in iven
Followed the tutorial, making things easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Les from Tallahassee, FL
- Parts Used:
- DG32-00002B
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The Samsung oven was not heating at the correct temperature even after replacing the heating element.
This was a simple repair. Ater unplugging the oven from the outlet, and removing the oven racks, it was simply a matter of using a long handled Phillips screwdriver to remove the one screw holding the original heat sensor in place. It was not necessary to remove the oven door. There was no need to remove the existing heating element. After the screw was removed, I removed the back cover of the oven (held together by several screws). Unplugging the existing sensor took a bit of time since it was difficult to press down on the clip to separate the wire from the connector. After releasing the sensor wire, it was simply a matter of feeding the old sensor wire back through the oven and removing it from the oven. The new sensor from this site was installed by reversing the removal procedure. It clipped into place easily. I reinstalled the back plate to the oven, connected the oven to the 220 outlet and was done. The oven heats perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jared from LAKE OZARK, MO
- Parts Used:
- DG44-01002A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
You sent me the wrong part 2 times !!!!!!
You sent me the wrong part, and now I am getting the runaround
about sending the part back and to refund my money.
I am very disappointed with the way things are going.
Jared
about sending the part back and to refund my money.
I am very disappointed with the way things are going.
Jared
Was this instruction helpful to you?
Thank you for voting!