Models > 2735*0A > Instructions

2735*0A Roper Range - Instructions

Jump to:

All Instructions for the 2735*0A
1 - 14 of 14
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mark from Albuquerque, NM
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My stove top is 30 years old. I was down to one knob. I looked up the part by brand and age. the pictures were accurate and the size dimensions were perfect.
Pulled off the one remaining knob, installed the new ones. One minute and the stove works perfectly.
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Heather from Alameda, CA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken knobs from highly enthusiastic cleaning ladies...
In my perpetual state of optimism, I hoped that the part description was incorrect and that the cost for the knob was actually a cost for a set of knobs. Woe to the consumer who doubts his own eyes! Yes, you will be paying about $25 after s/h for a single knob- but it matches, it works, it fits, and it takes less than 2 seconds to install, so kudos to the manufacturer who knew this would be a good form of supplemental income from their product... I still adore Whirlpool despite their exorbitant pricing on plastic knobs... :)
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Teresa from Cincinnati, OH
Parts Used:
WP330190
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Old burner knob broke off and couldn’t be repaired
Replaced the knob by sliding it on.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Fort Collins, CO
Parts Used:
WP8189867
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
light wont come on
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the breaker. Then I saw the short and when I tested the switch it would not click. The install was fine.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dean from Hollywood, FL
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The oven knobs were missing on my stove.
I opened the door to recieve the parcel from the courier. I opened the envelope containing the knobs. I took the knobs out of their plastic bags. I then place the knobs on the control stubs. The whole project took less than a minute and would not have been possible without PartSelect.com.

Thanks for everything!

Sincerely,

Dean Harley
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Velma from Andrews, TX
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
needed a thermostat and 2 burner knobs
just slipped them on
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roger from Redmond, WA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
knob broke
New knob arrived promptly and matched exactly.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rev. O. C. from North Little Rock, AR
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The knob had worn out and I needed it replaced.
All I had to was fit the knob on the stem of the burner and push on it and turn the knob.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marcia from Sandston, VA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed replacement knobs
My stove is well over 15 years. When I bought my house over 7 years ago the stove was ancient and had only 2 knobs. Well, one of the two fell apart and I could not afford to replace the stove. Lo and behold there was a part number on the back of the knob and I did a goggle search and found an identical replacement. The kind they sell at the store, the adjustable ones, did not work. Anyway, I placed the order during the New Year holiday and I got my knobs in 2 days. Beautiful and shiny and best of all I can use all my burners for the first time ever.Thank you
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cathy from Landrum, SC
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
just put it on
Needed new knobs to go on the stove. I only had one left in the original ones for the stove that was bought 27 years ago.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Shelley from Sun City Center, FL
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Control knob broke
Old appliance did not know if replacement knob available. Ordered on Sunday and received new knob on Thursday. Great service.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Oakley, CA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
age made my burner knobs crack
Removed the old knobs and replaced with the new ones in about 5 seconds.I couldn't believe after ordering the parts one morning, they were on my doorstop the next day. Remarkably easy is all I have to say.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David J from Friday Harbor, WA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken burner control knob
replaced knob
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Brimfield, MA
Parts Used:
WP330190
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Surface burner knob broke
Part was an exact replacement. Just aligned the knob with the stud on the range and gently press the replacement knob on.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 2735*0A
1 - 14 of 14