Models > 2059B40 > Instructions

2059B40 Roper Range - Instructions

Jump to:

All Instructions for the 2059B40
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Fort Collins, CO
Parts Used:
WP8189867
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
light wont come on
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the breaker. Then I saw the short and when I tested the switch it would not click. The install was fine.
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from New Douglas, IL
Parts Used:
4325190
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
No control for temp. max out!
Remove oven from cabinet tested the relay. Found out the contacts would not open. I looked for parts on the internet and your web site was the best for what I needed. I was impressed with the delivery time that was the next day. For a oven thats as old as this one to get the right part and not have to change this out and install new is a unheard of. Thank you ( I have other app. just as old and hate to replace with new that I don't care for! ) Will use you again!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 2059B40
1 - 2 of 2