MLY2256AD* Maytag Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Randall from Rochester, NY
- Parts Used:
- WP74002414, 74002413
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
igniter would no longer work, it would stick
pull knob off streight out. remove two phillips head screws, disconnect wire to disassemble. To reassemble reattatch wire to replacement igniter, screw in two phillips head screws and push on the knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alta from Rexford, MT
- Parts Used:
- 12002826
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
existing grates were very worn.
Just ordered a new grate. Everyother place I talked to said the one piece grate would not fit, so I am very pleased with the service you offered.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from ALLEYTON, TX
- Parts Used:
- WPY8007P02060
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Grommets missing on stove top
Placed the grommets in the specific hole on the stove top and pushed down. The grommets fit perfectly and the burners are now stable once again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lee from Ocean Shores, WA
- Parts Used:
- 74004359
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken oven knob
My local RV store informed me that this part was no longer made. Fortunately I discovered PartSelect.com and found the part I needed. Slipped it on and now I can use my oven!!!! Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DONNA from WARREN, PA
- Parts Used:
- WP74002414
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old knob is broken
This item had to be returned. Didn"t fit. Our shaft is shorter, and the new knob would not stay on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from ARCHER, FL
- Parts Used:
- 74002413
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Wouldn't ignite
Pulled knob,removed 2 screws removed wire,removed old ignitor repl. With new reversed procedure,done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- gail from bethany, MO
- Parts Used:
- 74001794
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob worn put
easy replaced after giving proper model and serial numbers. They were very helpful sending pictures so i could choose which knob might work as they had two for the same model number. The person answering my call was very helpful. Also return of the wrong ones I ordered was easy and refund prompt. I would highly recommend this company.Gail from Mo.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ray from azle, TX
- Parts Used:
- 74006334
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
owen would not light because the coupler was not mounted right
removed flare nut and the two screws pull coupler back put in new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Niland, CA
- Parts Used:
- 74002413, WP5111A719-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Igniter failed
The igniter on our RV stove top failed after 4 years of operation. The repair took about 8 minutes and everything works fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Vancouver, WA
- Parts Used:
- WP74002414
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The rotating ignitor knob on my RV stove broke
The old knob simply slides off the shaft. I aligned the fins on the back of the new knob with the grooves on the shaft of the ignitor and pressed the new knob on.
Was this instruction helpful to you?
Thank you for voting!