Models
>
968-4CX
968-4CX Magic Chef Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This spade style bake element is 16 inches long and 16 inches wide. The depth of the terminals is two inches. Use it for your Maytag brand electric range or oven.
In Stock
Order now and your part arrives by Apr 6
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 968-4CX
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mary from Salisbury, NC
- Parts Used:
- WP7406P012-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
heat element wouldn't heat after 30 years of cooking
Pulled screws loose from element, pulled old element out and replaced with new..really simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- tom from cincinnati, OH
- Parts Used:
- WP7406P012-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Lower element in oven not heating.
Removed, tested and measured the old element. Got on line to find the part and ran across Part Select. Ordered and received the part in three business days. It was an exact fit and in good order. The total operation including removal and replacement of the element, locating and ordering the part only took about thirty minutes.....and that
... Read more
includes the ten minutes it took me to find my #2 Phillips screwdriver! : )
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffrey from Abilene, TX
- Parts Used:
- WP7406P012-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The bake element was corroding.
I turned breaker off for oven, removed screws from element mount, pulled the element out about two inches, then slid wire connectors up to unhook from element. Then set new element in, slid wire connectors on to back new element, then used pliers to make sure they were tight and secure by squeezing them, screwed element back in, turned br
... Read more
eaker back on. Turned oven onto bake and left on for few minutes while it burned chemicals off element. Very simple!!
Read less
Was this instruction helpful to you?
Thank you for voting!