Models > 70138

70138 Litton Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 70138

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$10.72
This part includes one range leveling leg, sourced directly from the original manufacturer. The leveling leg is what supports the range and ensures it is sitting level, stable, and at the proper heigh...
In Stock
This is a multi-use screw mostly used in dryers. It has a diameter of #10, length of one inch, and thread size of 16. Remember to follow safety practices and instructions provided in the manufacturer ...
In Stock
The top of this part is now black.
In Stock
$93.53
This square burner grate has sides measuring almost nine inches long. It is all black in color. Sold individually.
In Stock
Sold individually.
In Stock
$7.68
This is a multi-use frame screw that fits a variety of power tools and equipment. Follow installation instructions and safety practices provided in the manual by the manufacturer.
In Stock
This screw is sold individually.
In Stock
$4.27
This screw is sold individually.
In Stock
This gas valve knob is two inches in diameter. It is black in color with white lettering denoting the off, high, and light positions. Made entirely of plastic, this knob will accept a 'D' shaped shaft.
In Stock
This door handle spacer assembly contains two screws and two spacers.
No Longer Available
This clip is used to secure the thermostat bulb. They are sold individually.
In Stock
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Paul from Arlington, MA
  • Parts Used:
    74010590
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Wrench set
pilot lit but oven would light
replaced the oven safety valve. This device uses heat from the pilot to hold open a valve that allows gas from the thermostat control to feed the main burner. It works by boiling the liquid mercury in the sensor bulb, producing the pressure to hold open the valve. My sensor had failed from old age, leaking the mercury.

Spilled mercury needed to be collected and properly disposed, and the valve was a tough fit among the sheet metal parts that form the path for the gas to the burner slots. The valve is secured by flat head sheet metal screws and the gas plumbing is a tapered pipe fitting. The sensor bulb has a small steel spring to hold it in the proper spot to sense the pilot light.

I used gas-rated pipe dope on the gas fitting, probably unnecessarily. Valve faces only 1/2 psi pressure...
19 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Linda from Jenison, MI
  • Parts Used:
    WP2003X030-00
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
original light grey color grates stained and unsightly--no amount of scrubbing or cleansers would make them look nice.
Opened the box and took out the black color grates~~removed discolored grates and put the new ones on. Looks like a brand new stove and much nicer to look at as it is the first thing you see when you enter the kitchen.
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Raymond from BLOOMINGTON, MN
  • Parts Used:
    4396923
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Purchased home but stove had no broiler pan.
Purchased 2 piece broiler pan from this site
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!