Models
>
FB4335NS
FB4335NS LG Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Sep 12
$78.20
If your appliance isn’t heating or cooling the way it should, this temperature sensor might be the issue. Also known as a thermistor, it helps your appliance stay at the right temperature by working w...
In Stock
Order now and your part arrives by Sep 12
$214.67
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
On Order
In Stock
Order now and your part arrives by Sep 12
On Order
Special Order
This control panel assembly provides the user interface for operating appliance functions and settings. It is commonly replaced when buttons fail to respond, displays malfunction, or controls become u...
No Longer Available
In Stock
Order now and your part arrives by Sep 12
Common Problems and Symptoms for FB4335NS
Viewing 6 of 6Little to no heat when baking
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Martin from KEWASKUM, WI
- Parts Used:
- MEE61841401
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Oven wouldn't ignite
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from CORTLAND, OH
- Parts Used:
- AGM73329005
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
F3 Error Code
F3 Error code. Most documentation suggested checking oven sensors. They were good (Checked 1050 & 1080 Ohms). Next most common problem was bad connection somewhere. This was not problem. Documentation then suggested it would be main system board. This did not fix problem. If I shut power off disconnected key pad error F3 did not come back
... Read more
(although the PF power failure stayed on as no key pad). If I shut power off and plugged in key pad PF (power failure) came on and in a short time F3 appeared. I changed key pad and problem is gone.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Meadows Place, TX
- Parts Used:
- MEE61841401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Both ovens would not light
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Was this instruction helpful to you?
Thank you for voting!