Models > LDE4413ST

LDE4413ST (00) LG Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for LDE4413ST

Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
In Stock
$18.00
In Stock
In Stock
In Stock
In Stock
$139.55
In Stock
Genuine OEM Burner Knob
In Stock
In Stock
In Stock
In Stock
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
October 24, 2021
The range controls do not work at all. Was having issue with it for several months, and did breaker reset, which corrected it. Did a self clean recently, and start button and timer do not work at all now. Stove top works still.
For model number LDE4413ST
Fix.com logo
Hello James, Thank you for your inquiry. We have researched your model and it could be either the touchpad or the main control board. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for LDE4413ST

Viewing 6 of 6
Little to no heat when baking
Fixed by these parts
Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from CHESAPEAKE, VA
Parts Used:
MEE62385201
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Hammer 1, Glass range top and heating element 0
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution:
1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
13 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barry from PIERRE, SD
Parts Used:
EAU62343001
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
linda from LAKEWAY, TX
Parts Used:
4890W1N005W
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
glass broken lower oven
remove door from oven.
removed screws slipped new window glass. in

very easy
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!