Models
>
RF1052BW
RF1052BW (AWHLLGA) LG Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RF1052BW
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
$31.85
This thermal safety thermostat is used to help protect the appliance from overheating by interrupting an electrical circuit when temperatures rise above its cutoff point. It senses heat at its mountin...
In Stock
Order now and your part arrives by Nov 23
$84.29
This oven temperature sensor maintains steady cooking temperatures. It measures heat inside the oven cavity and sends readings to the main control board, helping the heating elements cycle as needed. ...
In Stock
Order now and your part arrives by Nov 23
$31.85
This range leveling leg is used to support the appliance and lets you adjust the height of one corner for a steady, level cooking surface. Its threaded post screws into the base and turns to raise or ...
In Stock
Order now and your part arrives by Nov 23
On Order
In Stock
Order now and your part arrives by Nov 23
$55.18
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, of...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
Special Order
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
Common Problems and Symptoms for RF1052BW
Viewing 8 of 8Little to no heat when baking
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dennis from CARY, IL
- Parts Used:
- MEE36593201
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
No heat in oven mode
Verified P/N with LG. Took a few days . They sent names of several suppliers, cost was almost double. Ordered part from P/S, here in 2 days. Watched video on you tube. Unplugged, took off back, unplugged bake element, removed power box. The opening for bake element is still attached to rear panel by tiny bits of sheet metal. Used Dremel w
... Read more
ith cut-off wheel to cut thru nibs & deburr opening. this panel has to be removed, it rests on bottom panel & is held in position by power box. Removed bake element carefully, front of element broken, tried to put new element in, would not fit. Had to grind notches in bottom panel down to clear supports on new element. This did the trick. back together quick & no problems. If had to do again estimate less than 1 hour.. By the way am 81 yrs. young.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from MILWAUKEE, WI
- Parts Used:
- 5300W1R005A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
wouldn't turn on
simply take picture b4 you start then replace same way.
WARNING!!! MAKE SURE YOU HAVE RIGHT PART!! They are very slow to return any type of credit
WARNING!!! MAKE SURE YOU HAVE RIGHT PART!! They are very slow to return any type of credit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROBERT from CHIPPEWA FLS, WI
- Parts Used:
- 6871W1N009E
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
No power to unit after self clean was ran.
Unscrewed the back panel and Sub assembly then unplugged the board and replugged and put back screws. The ribbon wires were kinda hard to put back in make sure they are in all the way. Check the therm fuse first ( $3.00 fix ) mine was good so next was to try the board.
Was this instruction helpful to you?
Thank you for voting!