Models > LTG4715BM

LTG4715BM (00) LG Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: EBG61305805
$73.39
If your appliance isn’t heating or cooling the way it should, this temperature sensor might be the issue. Also known as a thermistor, it helps your appliance stay at the right temperature by working w...
In Stock
Order now and your part arrives by Mar 19
Oven Igniter – Part Number: MEE61841401
$190.95
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
In Stock
Order now and your part arrives by Mar 19
FOOT – Part Number: 4778W1N001B
$20.95
In Stock
Order now and your part arrives by Mar 19
SUPPORTER,LEVER – Part Number: MJH64334701
$20.95
In Stock
Order now and your part arrives by Mar 19
MOTOR,AC FAN – Part Number: EAU62343001
$119.95
In Stock
Order now and your part arrives by Mar 19
Oven Rack – Part Number: MHL63411403
$69.31
In Stock
Order now and your part arrives by Mar 19
Thermostat – Part Number: 6930W1A003J
$20.95
In Stock
Order now and your part arrives by Mar 19
NOZZLE – Part Number: MFV61841519
$20.95
In Stock
Order now and your part arrives by Mar 19
Power Transformer Assembly – Part Number: EBJ64465501
$63.19
The spark module controls the spark for lighting the cooktop surface burners.
In Stock
Order now and your part arrives by Mar 19
Common Nut – Part Number: 1NHB0500032
$13.60
Special Order
Range Surface Burner Orifice, Center Rear – Part Number: MFV61841504
$36.00
In Stock
Order now and your part arrives by Mar 19
WINDOW,GLASS – Part Number: 4890W1N005W
$81.95
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for LTG4715BM

Viewing 7 of 7
Little to no heat when baking
Fixed by these parts
Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Won’t turn on
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Barry from PIERRE, SD
Parts Used:
EAU62343001
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin from KEWASKUM, WI
Parts Used:
MEE61841401
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Oven wouldn't ignite
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
11 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roy from MARBLE FALLS, TX
Parts Used:
EBR80327001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
the oven knob was not working to select the desire operation
Took off the front panel of the range and found the circuit board that operated the Oven knob selections and took it off got the part number and order it. Then just replaced it as the reverse of taking it off . The oven knob work to the desire selections on the range .
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More