Models
>
LSGL6337F
LSGL6337F (00) LG Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$214.67
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
On Order
In Stock
Order now and your part arrives by Aug 22
In Stock
Order now and your part arrives by Aug 22
$65.80
The spark module controls the spark for lighting the cooktop surface burners.
In Stock
Order now and your part arrives by Aug 22
Special Order
$47.14
This surface burner cap is designed for use on high-output gas burners rated at 18,500 BTU and plays an important role in safe and efficient cooking performance. Positioned on top of the burner head, ...
In Stock
Order now and your part arrives by Aug 22
In Stock
Order now and your part arrives by Aug 22
In Stock
Order now and your part arrives by Aug 22
$76.42
This genuine LG range surface burner head is designed to deliver even heat distribution for precise and efficient cooking. It directs gas through multiple ports to create a consistent flame, ensuring ...
In Stock
Order now and your part arrives by Aug 22
Special Order
In Stock
Order now and your part arrives by Aug 22
$43.92
This surface burner cap is a genuine replacement part designed to cover the burner head on your gas range, helping ensure even flame distribution for consistent cooking results. Its durable, heat-resi...
In Stock
Order now and your part arrives by Aug 22
Common Problems and Symptoms for LSGL6337F
Viewing 5 of 5Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Little to no heat when baking
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Barry from PIERRE, SD
- Parts Used:
- EAU62343001
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go.
... Read more
Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martin from KEWASKUM, WI
- Parts Used:
- MEE61841401
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Oven wouldn't ignite
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Meadows Place, TX
- Parts Used:
- MEE61841401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Both ovens would not light
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Was this instruction helpful to you?
Thank you for voting!